GShell 0.2.5 − 電子署名付きHTML

開発:さて今日は、昨日やりかけて終わった、JavaScript で Go のプログラムを生成する件で行こうかと思いますが。

社長:緊急動議。HTMLとかPNGに電子署名する話が着手されてないですね。GShellでやってみると良いのでは。この機能は、あればすぐに使いたいものです。gsh.go.html を公開する上でも。

開発:確かに電子署名は創立以来の本丸でした。

基盤:緊急動議。GShellでレンタルサーバにHTTPの口からログインしたいです。SSHがかかったるいし。やりたいのはGShellで既に出来ている遠隔exec、実際単なるtail -f だからです。

開発:リクエストと応答をHTTPにくるむ必要がありますが、そもそも現状、コマンドごとにコネクションを張る実装になってますし、GShellサーバをCGIとしても動かせばよいかなと思います。

社長:一回、我社のバックログを洗い出すというか、着手していることも含めて、整理する必要がありそうです。ちょっとたばこと飲み物を仕入れてきます。

* * *

社長:ひーはー… 帰りました。

基盤:遅かったですね。

社長:車で出て、大好評のとうもろこしとスイカを仕入れて来ました。

開発:カット版ですね。

社長:それが、小玉スイカの12分割みたいのが590円とかして、あんぐりしまして。しゃぐ。

開発:何がおきてるんでしょうね。しゃぐ。甘さイマイチ。

基盤:やはりスイカはでっかく切ってかぶりつかないとですね。しゃぐ。

社長:それに引き換えこのとうもろこし、結構太くて一本128円です。4本で512円。

基盤:ずいぶんキリの良い値段ですね。

開発:さっそくチンしましょう。90度で5分30秒くらいかな… レンジでGo!

レンジ:ゴーー…

社長:そういえば、タバコに着火するのに使い捨てライターはもったいないと思うようになりました。携帯するわけではないし、台所のガス台の前で吸ってるわけですから。

基盤:ベランダで吸えばいいんじゃないですかね。気分もいいでしょうし。うるさい換気扇を回す必要もないですから。

開発:うーん、とうもろこしの甘い香りがして来ました。

レンジ:ぱぴぺ、ぱぴぺ、ぴぴぽぽぱー

開発:出来ました。どれどれ… あちっ、あちち。これしばらく触れないんですよね… やれ剥けました。

基盤:みっしり詰まってますね。どれどれ。はぐ。もぐもぐ。うん美味しい。

社長:もぐもぐ。前のよりスイート感が低い感じですが味が濃い気がしますね。色も濃い目。もぐもぐ。

開発:加熱時間も関係するかもですね。もぐもぐ。あー美味しかった。

基盤:これで128円はおトクですよね。

社長:100円ちょっとで売ってる低価格のカップ麺の凄さというのも改めて感じます。

* * *

開発:ふあぁ。。よく寝ました。

基盤:今日はまだ、とうもろこしを食べただけですね。

社長:手を動かすのだけが仕事ではありません。わたしは寝てる間に面白い事を思いつきました。

基盤:夢のお告げというやつですね。

開発:どのような。

社長:イベントレコーダーです。発生したイベントを時系列で記憶しておく。再生もできる。まあとりあえずキーロガーで良いです。たとえばGShell IMEでの入力操作を再生できたら見た目に面白いんじゃないかと思います。

開発:script コマンドは欲しいと思ってましたが、それの特殊系のようなものですね。

基盤:キー入力レベルのヒストリというか。

社長:そうそれで、記録したものを外部表現できて伝達できて別の場所で再生できると良いと思うんです。できるだけコンパクトな表現で。

開発:文字列の中に ¥b みたいな機能コードを表現できますが、あれに「指定時間遅延をする」という抽象的なコードを入れると良さそうですね。

社長:それか、ANSIIのエスケープシーケンスの拡張ですかね。

開発:コンパクトということにこだわらなければ、イベントを生成するコマンド列であっても良いですよね。タイミング情報付きのスクリプトというか。

基盤:タイミングは usleep コマンドで作ればいいんじゃないですかね。

社長:それもありですね。いろんな表現形式があって良い。

開発:実例をやってみせて学習させる式のプログラミングみたいのがありましたよね。なんちゃら by example とか by demonstration とか。

社長:GShell にもそういう感じの機能があると面白いですね。

開発:GShell+unfs3 で Automatorみたいなのは作りたいですね。

* * *

基盤:ああ、洗濯が終わってますね。おー、糸くずフィルターがーっ!て警告が。

開発:糸くずはまだしも、乾燥フィルターのほうがすごくないですか。座布団みたいに積もってる。

経理:このぶん、衣類が痩せてしまったかと思うと悲しい気分ですね。

基盤:掃除掃除。パカっと開いて捨てるだけ。よく出来てますねー。これって、前の機種だと結構面倒だったんです。

社長:内部にどっさりたまってしまって、針金で掻き出したり掃除機で吸い出したのを思い出しますね。

開発:しかしこれだけフィルターに堆積していても、乾燥が機能してたというのは大したものですね。

基盤:以前は毎回に近く乾燥フィルタはクリアしてたんですけどね。なんで忘れてたのかな…

経理:効率が下がって余計に電気を消費してたのでは無いでしょうか。

基盤:しかし衣類が痩せるとか電気を食うとか「洗濯物を干す」という作業のコストを考えればネグリジブルだと思いますね。季節によっては生乾きの匂いに嫌な思いをしていた時代が信じられません。

社長:そもそも「洗濯をする」こと自体が手作業で、大変な労力をかけてた時代もあったわけです。人類史的にはずっと。つい数十年前まで。

基盤:家電的にはテレビはもう見ないし、冷蔵庫もコンビニのおかげで無しでも過ごせるようになりましたが、洗濯機だけは無くてはならないですね。

社長:学生時代は共用の洗濯機かコインランドリーでしたけどね。これが非常に壊れやすくて稼働率が低かった。一人の専有時間も長くて空きを待つのが大変。全自動洗濯機はまさに夢の家電でした。夢がかなった今も。

開発:槽内に糸くずが舞ってますね。

基盤:そういえばメンテナンスコマンドを2ヶ月ばかりやってませんでした。では自動クリーニングのフルコースで。うーん、洗濯機って面白いな−。

* * *

経理:7月ぶんの年貢を納めようと思って、PayB でピッとしようとスマホのカメラを向けたら、バーコードが無い事に気が付きました。

基盤:国税はPay-easyですね。

開発:なんでバーコードを付けないですかねー。

社長:出力フォームの変更に大幅なシステムの作り直しが必要だとか。ハイリスクなのにお役所にはノーリターン。

経理:それで、銀行のペイジーの画面で納付番号を入力したのですが、2回間違えてしまいました。12桁の数字なので、4桁ごとに区切りらないとわかりにくいです。

開発:ああ、あの「区切りのハイフンはいりません」ていうやつ。親切心なんですかねw

基盤:別にあなたのためではなく自分のために入れたいだけなんですがって。

開発:システムを設計した人がたまたまブレインダメージドだったんですかね。誰しもそういう日はあります。

基盤:逆に任意の場所に空白とかハイフンを入れても認識してくれるのもありますよね。

経理:英数字の全角だ半角だってのも困ります。

開発:いずれそもそも人間が入力しなくても良くなるでしょうけど。とりあえずバーコード、いずれ電子証明書があれば済むことです。

社長:しょぼい機械に人間が合わせなければならなかった時代。それを引きずった非道なUIで人が苦しめられていた時代。そんな時代もあったねと、笑い話に時が変えるよ、もうすぐね、みたいな。

基盤:そういえば社内でのログインにフェリカを使おうって買ったきりになってますね。

開発:あれは、リーダライタのドライバがmacOSに対応してないことがわかったので、計画が頓挫しました。

基盤:Parallelsが全く問題ないことがわかりましたから、いずれWindowsで読ませてMacに伝達すれば良いと思います。

社長:パスワード入力を求められたらフェリカに聞きに行くようなインフラができると良いですかね。

基盤:そしたらもうパスワードは全部、最大長のランダムな文字列にしてやりたいです。

開発:パスワードのリポジトリという意味では、別にフェリカでなくても良いようには思っています。物理的な接続・切断が簡単にできるメディアであれば。

基盤:USBメモリの抜き差しは結構面倒ですね。

開発:そこはスイッチ付きのUSBハブで。

社長:ラズパイをパスワードサーバにして、Etherを落とすというのもありかと。ああ、無線だと簡単じゃないかな。

開発:サーバのバイナリの中に暗号化して焼き込むのも良いかもですね。GShellをサーバにして。

基盤:ssh-agent 的な感じですかね。

開発:起動するのにパスワードを要求される自分専用のshellというか、実行ファイルってあって良いと思うんです。自分専用のbinに置く。OSでのユーザ認証とかに頼らない。

社長:ああそれは DeleGate でもやってました。GShellの場合、ブラウザからJavaScript でgsh.goを生成する時に埋め込めると便利だと思います。でバイナリをbuildしてソースは消す。

開発:ほとんどの場合パスワードはブラウザからの入力ですから、やはりクライアント側としてはブラウザに手を突っ込むのが一番手っ取り早いかなとは思います。

基盤:Acrobatという難関がありますけどね。

* * *

社長:ということで今日は、計画を変更してイベントレコーダをやりたいです。

開発: 起動するのにパスワードが必要なGShellっていうのも面白いとは思いますが。

社長:まあそれは後日。

基盤:クリーニング中で洗濯機の槽内が泡だらけになってるのが面白いですが、槽内の照明のLEDが8秒くらいで切れてしまうのが本当にムカつきます。せめてスイッチを押してる間は点灯してるとかすれば良いのに…

開発:それにしてもこれ、イベントをつかまえるというなら、tty の read じゃなくてキーのイベントを捕まえたいですね。そうすればもっと分解した単位で捕まえられると思うのですが。stty -echo -icanon なんて外部コマンドでやっているのも内心忸怩たる思いもあり。

社長:イベントを飛ばしてくれるTerminalアプリを作ると良いかもですね。

基盤:Windows版のGoでは使えなそうな。Cygwinでイケるんでしたっけ?

社長:まあそれも後日。とりあえずこっちを先に進めましょう。

開発:えーと、キー入力の時刻とキーをイベントの可変長配列に追加していくと。こういうとこがGoはCより簡単で便利なんですよね。安全だし。性能的にはどうか知りませんが。で、イベントをダンプする。time.Time からナノ秒を取り出すには… … ああ、まんまNanosecond() ってのがありますね。

開発:ということで、とりあえずこんな感じに。

基盤:おー、キーロガーだ。

社長:再生は!コマンドと同じようにやると良いかもですね。!1-2 とかすると、!1から!2までの実行のタイミングどおりにキー入力を再生する。

開発:!コマンドはコマンドライン入力された後の文字列を直接再現実行しちゃいますが、キーの入力のタイミングまで再現するコマンドを作れば良いのでしょうね。うーん、つまりキー入力のイベント列を入力のキューに入れて、そこにあればttyじゃなくてそこから読む、みたいな実装が簡単かな。replay 1-2 みたいなコマンドで。

社長:何もなく時間が経過した、っていうのも一種のイベントとして入れとくと、実装が簡単そうですね。

開発:レベルかエッジかってとこですかね… じゃま、WAITという仮想的なキーが押されていたとします。

基盤:WAITというかIDLEじゃないですかね。

開発:じゃIDLEで。IDOLにしようかな。バイバイバイわたしのアイドル〜♪

社長:この、イベントにヒストリの番号とか、高次のコンテクストをセットにして記憶するのは何かに使えそうな気がします。

開発:それはコマンドヒストリ自体もそうだと思うんです。そのコマンドをどのワーキングディレクトリで実行したかとか。

基盤:以前と同じディレクトリで同じコマンドを実行したいって普通にありますよね。

* * *

社長:うー、無性にチューリップが聴きたくなりました。

基盤:iPhoneのiTunesに全部入ってますよね。

社長:めんどくさい。昔は手持ちのCDを全部 iMacのiTunesに読ませて、簡単にプレイリストくりくりで聞けて便利だったんですが。

開発:そいうえば何年か前にYouTubeでチューリップにハマってましたよね。残ってるのでは。

社長:久しぶりGoogleにログイン…高く評価した動画・・・ありました。だいぶ消されちゃってますね。河口湖のライブのパックがすごく良かったんですが…

開発:しかしひどい画質ですね。Retinaが泣いている。

基盤:でもiMacスピーカーは大活躍。ちゃんとどっしりしっとりした音がでますね。アンプの関係も?

社長:フィリップス君のスピーカーは悲惨でした。

開発:まあオーディオは当時より今のほうが退化してるかもですね。

社長:YouTubeで色々探すと、姫野さんの風貌の変遷が面白いんですw

開発:あー、山本潤子幸せになるためが続いてでましたね。しみ入るナ〜…

基盤:プリキュア夢は未来への道来ましたw

社長:くじけない決して逃げない〜♪ か…そう言えばつらい時代もあったよね。

開発:これは前に聴いてたのと詰合せが全然違いますね。

社長:まあどうせフローラくらいしか覚えてないですけど。でもこの作詞者天才かなと思います。

基盤:これBGMとしてプレイリストローテーションしときませんか。なんか元気出ますし。

社長:いろんなのを高く評価しちゃってますからねー。プレイリストって複数作れるんですかね?

開発:自前で作ればいいんじゃないですかね。URLを開くコマンドを外からブラウザに送れれば良いと思いますが… あるいはJavScript にリストをわたしてwindowを順次開かせるとか。プレイの終了をどうやって検出するか… まあ window のURLが変わったのを見ればいいんですかね。

基盤:別のアカウントでやれば簡単なのでは。Tube-Uでやりましょうか。

社長:いや、sato@its でいいです。これは正式な福利厚生の一環です。

基盤:前に聴いてたプリキュアの詰め合わせってこれですよね。

社長:ああそれです。

基盤:ではとりあえず、チューリップと山本潤子と北川理恵ローテーション、セットしました。

開発:竹田の子守唄もしみるナー…

基盤:続けて聴いてるとあっという間に空気になっちゃうでしょうけどね…

開発:久石さんのStand Alone と幸せになるためはクルマで6年間に1000回以上聴いたと思いますが、飽きませんでしたね。

社長:iTunesで無くて良いので、手持ちのCDを読み込んでプレイリスト作って再生できると良いのですが。

基盤:また300枚読み込むんですか…

社長:青春の想い出ですからね。あれだけは引っ越しの時に捨てなくてよかったと思います。

開発:あとこれ、広告の自動スキップextension作りたいですね。

社長:画面をパターンマッチしてマウスクリックイベント出すだけですよね。ブラウザ内蔵でなくても良いのでは。汎用の「広告スキップロボット」で。

基盤:ここにもReCAPTCHA技術が採用されてるかもですがw

* * *

開発:では仕事を再開します。

社長:間に挟まってるカブトムシ♪がなかなか良いですね。

開発:BGMのある生活って、久しぶりですね。それで、IDLE時間を表示するようにしたら面白い事が分かりました。こんな感じです。

開発:ざっと見て、連続して入力している時のキーとキーの間隔は100ms程度です。つまり、わたしのキー入力は最速で1秒に10文字程度。ただし、ホームポジションから離れたキーを押す前とかは空走時間が長い。

社長:どのくらい再現性があるか調べると面白そうですね。昔、キー入力の癖で個人を特定する研究をしてる人がいましたが、こういうのが基礎データなんでしょうね。

開発:で、このタイミング情報を何か、IMEにおける変換の推測とか、ユーザの意図の推測とかに使えると面白いなと思います。

社長:ユーザが意図的に、打鍵のリズムで別の単語を選ぶとか言うのもいいかもですね。

基盤:少し長押ししたら長音記号が出るとか便利だと思います。

開発:あと、エスケープシーケンスの生成速度とか。上向き矢印は ESC [ A なのですが、一瞬で生成されてると思いますから文字間の時間間隔はナノ秒単位ではないかと。表示されている数マイクロ秒は、GShellによるキーの処理時間と思われます。

社長:これはコンピュータの負荷状況をざっくり知るのに使えるかも知れないですね。

基盤:定期的に行っている処理があれば、その時間のズレとか。

開発:いや、それはあるんですよ。1秒毎にselectで入力をタイムアウトして、行を再表示してるんでw。うざいから表示を削りましたが、表示するとこんな感じ。

開発:これは以前「そうだ、スケジューラを作ろう」の時にも測ったと思いますが、今回は暇人のiMacなので、スケジュールの時間のズレというか、selectがタイムアウトしてくる時間の遅延は少ないです。長くとも15ms程度。

基盤:さっきからYouTube流しているので、あれは結構スケジューリングを乱してるんじゃないでしょうか?止めてみましょうか。

社長:良くなったのかもしれませんが、4msズレたら組み込み系のリアルタイム用途では使えないですね。40usでも厳しい。4usでもダメな場合もある。

開発:まあ macOS は組み込み用じゃないですからねw

基盤:そういえば Parallels も動いてますしね…

開発:ということで、イベントのログを取るのはとりあえずこんなところかと。

社長:あとはいよいよ、再生ですね。ワクワク。

開発:私は少し飽きてきてしまったんですが、プリキュアが流れるとなんだかシャキっとしますw

* * *

開発:さて実装の形として、伝統的な形式でコマンド行入力が下請けになってるために、つくりがちょっといびつになります。入力を差し戻すという。GUIのようにイベント・ドリブンで出来てれば、もっと素直にできるんですが。

社長:Goルーチンでキーボード入力のフリをするタスクを作ればいいんじゃないですかね。タイミング調整しながらキー入力をpipeに送る。IMEは、tty とpipeをselectする。

開発:それは美しいかも知れない…

基盤:自動入力に手動入力を介入させるのは面白そうです。

開発:確定しました。それで行きます。そもそもキー入力だけでなく、ファイルやソケットの入力に全部これを仕掛けます。すると、割り込み処理無しで、ポーリングだけで、単一タスクでイベント処理ができる。排他制御とかしなくて済むし、一つのコンテクストで実行できるのも良いと思います。コンテクストを分けたければその時は分ければ良い。即時処理が必要な処理なら、ここを通らずに普通にGoルーチンを分ければ良い。

* * *

開発:前進しました。

社長:完成ですか。

開発:一歩手前、寸止め状態みたいな。いや、Go の syscall が Poll を提供してなかったり、socketpair の仕様がドキュメントと違ったりでちょっと嫌な思いをしました。それはともかく、こういうことになりました。

開発:ungets で date という文字列をキー入力として送っています。

基盤:ungetsじゃないのにw

開発:それで、#14 - #22 までの date の入力は手入力ですから、キーの間が100ms程度空いている。ところが、#24 - #32 でキー入力だと思って受け取ったキーは、数マイクロ間隔で届くというわけです。

基盤:驚速!

社長:驚速がGoogle IMEのデフォルトに無いのは悲しいですね。自分の辞書に追加っと。

開発:あれはあの時期、画期的なネーミングとインパクトのあるCMでしたよね。

社長:もう商品としては無いんですかね?

基盤:検索したら、ちゃんと販売してます。

開発:でも私らが言ってる驚速というのは、キーボード入力が速くなる、たしか練習ソフトだったような気がするんですよね。

* * *

開発:どうもブログでヨタ話を書いてる時間が長くて、作業が進みませんねw

基盤:プリキュア再生してで気分を再生しましょうw

開発:ふう、出来ました。これでいいんじゃないですかね。遅延入りで再生です。

基盤:機械で再生すると、人間のもっさり感を感じますねw

社長:いよいよ GShell IMEで行きますか。

開発:あれ、BGM止まった。盛り下げてくれますね。

基盤:やはりYouTubeプレイリスト再生を自作するのが良いかも知れませんね。

開発:それでは再びプリキュアをBGMに。行きます。

社長:その前にいっぷく…

* * *

開発:では行きます…

基盤:できた!

社長:できましたね。あれ?でもWordPressに動画がアップロードができないです…

基盤:セッションが切れてるような切れてないような…

社長:一度入り直しますか… これでどうかな?

基盤:なんかダメですね。昔の QuickTime は普通にアップロードできるようですが…

社長:サイズが小さすぎるとか?

開発:ああ、Safari では再生できますよ。Vivaldi が死んでるとか。

基盤:Vivaldi 以外のブラウザなら再生できますね。ていうか、iMacのVivaldiならOK。

社長:そうですか、立ち上げ直せば大丈夫なのかな。Vivaldi だけ動画の再生の色が変なことがあるんですが、あれも酷使し過ぎですかね。

社長:それはともかく、昼間見た「夢」が実現しました。

開発:夢は未来への道ですね。明るい未来が見えた気がしたw

基盤:そろそろMacMiniをやめろというお告げかもですね。もう購入して4ヶ月、十分使いました。RAMを増やしてあげればよいのかもしれませんが、保証外になっちゃいますし。

開発:Appleに保証サービスで直してもらった事は無いですけどね。ああ、iPhoneは交換しましたけど。

社長:それはそうと、このIMEの「世界」専用辞書は、専用だけあって「世界」を出すには最高ですね。今まで生きてきて一番、使いやすいです。

社長:それでこの例で気づいたのですが、replay する時にIMEの変換モードが再現されていないので、表示が実際のリプレイにならないということです。なので、上の例では replay の前に手動で再現しています。

開発:さすがにそこは自動で再現するようにします。

社長:ただ、どこまで環境を回復するかは難しいところですね。あらゆる時点の環境を保存できるわけでは無いし、そもそも回復できない外部環境もありますから。

開発:まあ、1コマンドごとにGShellのコンテクストをダンプしちゃうとか、可能だとは思いますが。再実行した結果を現在の環境に取り込もうとか、そもそも現在の環境で過去の操作を再実行しようという場合もあるでしょうし。

社長:GShellの環境まるごとダンプは良いのではないですかね。ホストがイキナリ落ちた場合にも、直近の状態から再開できそう。

開発:プロセスレベルのハイバネーションも出来ますね。

基盤:目覚めたときには浦島太郎だったとかw

開発:複雑な情報を含んだヒストリファイルとか作るの面倒だから、ずっと内部表現で維持しようかなw

社長:今日は面白い機能ができました。ちょっとした機能ですが、当社の one giant leap だったのかも知れません。

開発:あと思ったんですが、マウスの動作もこれ式でいくつかキャプチャしといて、自動でreCAPTCHAボタン押させてやれば、「私はロボットではありません」て破れるんじゃないですかね。

-- 2020-0829 SatoxITS

/* GShell-0.2.4 by SatoxITS
GShell version 0.2.5 // 2020-08-29 // SatoxITS

GShell // a General purpose Shell built on the top of Golang

It is a shell for myself, by myself, of myself. --SatoxITS(^-^)

0 | | Fork | Stop | Unfold | */ /*
Statement

Fun to create a shell

For a programmer, it must be far easy and fun to create his own simple shell rightly fitting to his favor and necessities, than learning existing shells with complex full features that he never use. I, as one of programmers, am writing this tiny shell for my own real needs, totally from scratch, with fun.

For a programmer, it is fun to learn new computer languages. For long years before writing this software, I had been specialized to C and early HTML2 :-). Now writing this software, I'm learning Go language, HTML5, JavaScript and CSS on demand as a novice of these, with fun.

This single file "gsh.go", that is executable by Go, contains all of the code written in Go. Also it can be displayed as "gsh.go.html" by browsers. It is a standalone HTML file that works as the viewer of the code of itself, and as the "home page" of this software.

Because this HTML file is a Go program, you may run it as a real shell program on your computer. But you must be aware that this program is written under situation like above. Needless to say, there is no warranty for this program in any means.

Aug 2020, SatoxITS (sato@its-more.jp)
*/ /*
Index
Documents Command summary Go lang part Package structures import struct Main functions str-expansion // macro processor finder // builtin find + du grep // builtin grep + wc + cksum + ... plugin // plugin commands system // external commands builtin // builtin commands network // socket handler remote-sh // remote shell redirect // StdIn/Out redireciton history // command history rusage // resouce usage encode // encode / decode IME // command line IME getline // line editor scanf // string decomposer interpreter // command interpreter main JavaScript part Source Builtin data CSS part Source References Internal External Whole parts Source Download Dump
*/ //
//Go Source
// gsh - Go lang based Shell // (c) 2020 ITS more Co., Ltd. // 2020-0807 created by SatoxITS (sato@its-more.jp) package main // gsh main // Imported packages // Packages import ( "fmt" // fmt "strings" // strings "strconv" // strconv "sort" // sort "time" // time "bufio" // bufio "io/ioutil" // ioutil "os" // os "syscall" // syscall "plugin" // plugin "net" // net "net/http" // http //"html" // html "path/filepath" // filepath "go/types" // types "go/token" // token "encoding/base64" // base64 "unicode/utf8" // utf8 //"gshdata" // gshell's logo and source code "hash/crc32" // crc32 ) const ( NAME = "gsh" VERSION = "0.2.5" DATE = "2020-08-29" AUTHOR = "SatoxITS(^-^)/" ) var ( GSH_HOME = ".gsh" // under home directory GSH_PORT = 9999 MaxStreamSize = int64(128*1024*1024*1024) // 128GiB is too large? PROMPT = "> " LINESIZE = (8*1024) PATHSEP = ":" // should be ";" in Windows DIRSEP = "/" // canbe \ in Windows ) // -xX logging control // --A-- all // --I-- info. // --D-- debug // --T-- time and resource usage // --W-- warning // --E-- error // --F-- fatal error // --Xn- network // Structures type GCommandHistory struct { StartAt time.Time // command line execution started at EndAt time.Time // command line execution ended at ResCode int // exit code of (external command) CmdError error // error string OutData *os.File // output of the command FoundFile []string // output - result of ufind Rusagev [2]syscall.Rusage // Resource consumption, CPU time or so CmdId int // maybe with identified with arguments or impact // redireciton commands should not be the CmdId WorkDir string // working directory at start WorkDirX int // index in ChdirHistory CmdLine string // command line } type GChdirHistory struct { Dir string MovedAt time.Time CmdIndex int } type CmdMode struct { BackGround bool } type Event struct { when time.Time event int evarg int64 CmdIndex int } var CmdIndex int var Events []Event type PluginInfo struct { Spec *plugin.Plugin Addr plugin.Symbol Name string // maybe relative Path string // this is in Plugin but hidden } type GServer struct { host string port string } // Digest const ( // SumType SUM_ITEMS = 0x000001 // items count SUM_SIZE = 0x000002 // data length (simplly added) SUM_SIZEHASH = 0x000004 // data length (hashed sequence) SUM_DATEHASH = 0x000008 // date of data (hashed sequence) // also envelope attributes like time stamp can be a part of digest // hashed value of sizes or mod-date of files will be useful to detect changes SUM_WORDS = 0x000010 // word count is a kind of digest SUM_LINES = 0x000020 // line count is a kind of digest SUM_SUM64 = 0x000040 // simple add of bytes, useful for human too SUM_SUM32_BITS = 0x000100 // the number of true bits SUM_SUM32_2BYTE = 0x000200 // 16bits words SUM_SUM32_4BYTE = 0x000400 // 32bits words SUM_SUM32_8BYTE = 0x000800 // 64bits words SUM_SUM16_BSD = 0x001000 // UNIXsum -sum -bsd SUM_SUM16_SYSV = 0x002000 // UNIXsum -sum -sysv SUM_UNIXFILE = 0x004000 SUM_CRCIEEE = 0x008000 ) type CheckSum struct { Files int64 // the number of files (or data) Size int64 // content size Words int64 // word count Lines int64 // line count SumType int Sum64 uint64 Crc32Table crc32.Table Crc32Val uint32 Sum16 int Ctime time.Time Atime time.Time Mtime time.Time Start time.Time Done time.Time RusgAtStart [2]syscall.Rusage RusgAtEnd [2]syscall.Rusage } type ValueStack [][]string type GshContext struct { StartDir string // the current directory at the start GetLine string // gsh-getline command as a input line editor ChdirHistory []GChdirHistory // the 1st entry is wd at the start gshPA syscall.ProcAttr CommandHistory []GCommandHistory CmdCurrent GCommandHistory BackGround bool BackGroundJobs []int LastRusage syscall.Rusage GshHomeDir string TerminalId int CmdTrace bool // should be [map] CmdTime bool // should be [map] PluginFuncs []PluginInfo iValues []string iDelimiter string // field sepearater of print out iFormat string // default print format (of integer) iValStack ValueStack LastServer GServer RSERV string // [gsh://]host[:port] RWD string // remote (target, there) working directory lastCheckSum CheckSum } func nsleep(ns time.Duration){ time.Sleep(ns) } func usleep(ns time.Duration){ nsleep(ns*1000) } func msleep(ns time.Duration){ nsleep(ns*1000000) } func sleep(ns time.Duration){ nsleep(ns*1000000000) } func strBegins(str, pat string)(bool){ if len(pat) <= len(str){ yes := str[0:len(pat)] == pat //fmt.Printf("--D-- strBegins(%v,%v)=%v\n",str,pat,yes) return yes } //fmt.Printf("--D-- strBegins(%v,%v)=%v\n",str,pat,false) return false } func isin(what string, list []string) bool { for _, v := range list { if v == what { return true } } return false } func isinX(what string,list[]string)(int){ for i,v := range list { if v == what { return i } } return -1 } func env(opts []string) { env := os.Environ() if isin("-s", opts){ sort.Slice(env, func(i,j int) bool { return env[i] < env[j] }) } for _, v := range env { fmt.Printf("%v\n",v) } } // - rewriting should be context dependent // - should postpone until the real point of evaluation // - should rewrite only known notation of symobl func scanInt(str string)(val int,leng int){ leng = -1 for i,ch := range str { if '0' <= ch && ch <= '9' { leng = i+1 }else{ break } } if 0 < leng { ival,_ := strconv.Atoi(str[0:leng]) return ival,leng }else{ return 0,0 } } func substHistory(gshCtx *GshContext,str string,i int,rstr string)(leng int,rst string){ if len(str[i+1:]) == 0 { return 0,rstr } hi := 0 histlen := len(gshCtx.CommandHistory) if str[i+1] == '!' { hi = histlen - 1 leng = 1 }else{ hi,leng = scanInt(str[i+1:]) if leng == 0 { return 0,rstr } if hi < 0 { hi = histlen + hi } } if 0 <= hi && hi < histlen { var ext byte if 1 < len(str[i+leng:]) { ext = str[i+leng:][1] } //fmt.Printf("--D-- %v(%c)\n",str[i+leng:],str[i+leng]) if ext == 'f' { leng += 1 xlist := []string{} list := gshCtx.CommandHistory[hi].FoundFile for _,v := range list { //list[i] = escapeWhiteSP(v) xlist = append(xlist,escapeWhiteSP(v)) } //rstr += strings.Join(list," ") rstr += strings.Join(xlist," ") }else if ext == '@' || ext == 'd' { // !N@ .. workdir at the start of the command leng += 1 rstr += gshCtx.CommandHistory[hi].WorkDir }else{ rstr += gshCtx.CommandHistory[hi].CmdLine } }else{ leng = 0 } return leng,rstr } func escapeWhiteSP(str string)(string){ if len(str) == 0 { return "\\z" // empty, to be ignored } rstr := "" for _,ch := range str { switch ch { case '\\': rstr += "\\\\" case ' ': rstr += "\\s" case '\t': rstr += "\\t" case '\r': rstr += "\\r" case '\n': rstr += "\\n" default: rstr += string(ch) } } return rstr } func unescapeWhiteSP(str string)(string){ // strip original escapes rstr := "" for i := 0; i < len(str); i++ { ch := str[i] if ch == '\\' { if i+1 < len(str) { switch str[i+1] { case 'z': continue; } } } rstr += string(ch) } return rstr } func unescapeWhiteSPV(strv []string)([]string){ // strip original escapes ustrv := []string{} for _,v := range strv { ustrv = append(ustrv,unescapeWhiteSP(v)) } return ustrv } // str-expansion // - this should be a macro processor func strsubst(gshCtx *GshContext,str string,histonly bool) string { rbuff := []byte{} if false { //@@U Unicode should be cared as a character return str } //rstr := "" inEsc := 0 // escape characer mode for i := 0; i < len(str); i++ { //fmt.Printf("--D--Subst %v:%v\n",i,str[i:]) ch := str[i] if inEsc == 0 { if ch == '!' { //leng,xrstr := substHistory(gshCtx,str,i,rstr) leng,rs := substHistory(gshCtx,str,i,"") if 0 < leng { //_,rs := substHistory(gshCtx,str,i,"") rbuff = append(rbuff,[]byte(rs)...) i += leng //rstr = xrstr continue } } switch ch { case '\\': inEsc = '\\'; continue //case '%': inEsc = '%'; continue case '$': } } switch inEsc { case '\\': switch ch { case '\\': ch = '\\' case 's': ch = ' ' case 't': ch = '\t' case 'r': ch = '\r' case 'n': ch = '\n' case 'z': inEsc = 0; continue // empty, to be ignored } inEsc = 0 case '%': switch { case ch == '%': ch = '%' case ch == 'T': //rstr = rstr + time.Now().Format(time.Stamp) rs := time.Now().Format(time.Stamp) rbuff = append(rbuff,[]byte(rs)...) inEsc = 0 continue; default: // postpone the interpretation //rstr = rstr + "%" + string(ch) rbuff = append(rbuff,ch) inEsc = 0 continue; } inEsc = 0 } //rstr = rstr + string(ch) rbuff = append(rbuff,ch) } //fmt.Printf("--D--subst(%s)(%s)\n",str,string(rbuff)) return string(rbuff) //return rstr } func showFileInfo(path string, opts []string) { if isin("-l",opts) || isin("-ls",opts) { fi, err := os.Stat(path) if err != nil { fmt.Printf("---------- ((%v))",err) }else{ mod := fi.ModTime() date := mod.Format(time.Stamp) fmt.Printf("%v %8v %s ",fi.Mode(),fi.Size(),date) } } fmt.Printf("%s",path) if isin("-sp",opts) { fmt.Printf(" ") }else if ! isin("-n",opts) { fmt.Printf("\n") } } func userHomeDir()(string,bool){ /* homedir,_ = os.UserHomeDir() // not implemented in older Golang */ homedir,found := os.LookupEnv("HOME") //fmt.Printf("--I-- HOME=%v(%v)\n",homedir,found) if !found { return "/tmp",found } return homedir,found } func toFullpath(path string) (fullpath string) { if path[0] == '/' { return path } pathv := strings.Split(path,DIRSEP) switch { case pathv[0] == ".": pathv[0], _ = os.Getwd() case pathv[0] == "..": // all ones should be interpreted cwd, _ := os.Getwd() ppathv := strings.Split(cwd,DIRSEP) pathv[0] = strings.Join(ppathv,DIRSEP) case pathv[0] == "~": pathv[0],_ = userHomeDir() default: cwd, _ := os.Getwd() pathv[0] = cwd + DIRSEP + pathv[0] } return strings.Join(pathv,DIRSEP) } func IsRegFile(path string)(bool){ fi, err := os.Stat(path) if err == nil { fm := fi.Mode() return fm.IsRegular(); } return false } // Encode / Decode // Encoder func (gshCtx *GshContext)Enc(argv[]string){ file := os.Stdin buff := make([]byte,LINESIZE) li := 0 encoder := base64.NewEncoder(base64.StdEncoding,os.Stdout) for li = 0; ; li++ { count, err := file.Read(buff) if count <= 0 { break } if err != nil { break } encoder.Write(buff[0:count]) } encoder.Close() } func (gshCtx *GshContext)Dec(argv[]string){ decoder := base64.NewDecoder(base64.StdEncoding,os.Stdin) li := 0 buff := make([]byte,LINESIZE) for li = 0; ; li++ { count, err := decoder.Read(buff) if count <= 0 { break } if err != nil { break } os.Stdout.Write(buff[0:count]) } } // lnsp [N] [-crlf][-C \\] func (gshCtx *GshContext)SplitLine(argv[]string){ reader := bufio.NewReaderSize(os.Stdin,64*1024) ni := 0 toi := 0 for ni = 0; ; ni++ { line, err := reader.ReadString('\n') if len(line) <= 0 { if err != nil { fmt.Fprintf(os.Stderr,"--I-- lnsp %d to %d (%v)\n",ni,toi,err) break } } off := 0 ilen := len(line) remlen := len(line) for oi := 0; 0 < remlen; oi++ { olen := remlen addnl := false if 72 < olen { olen = 72 addnl = true } fmt.Fprintf(os.Stderr,"--D-- write %d [%d.%d] %d %d/%d/%d\n", toi,ni,oi,off,olen,remlen,ilen) toi += 1 os.Stdout.Write([]byte(line[0:olen])) if addnl { //os.Stdout.Write([]byte("\r\n")) os.Stdout.Write([]byte("\\")) os.Stdout.Write([]byte("\n")) } line = line[olen:] off += olen remlen -= olen } } fmt.Fprintf(os.Stderr,"--I-- lnsp %d to %d\n",ni,toi) } // CRC32 crc32 // 1 0000 0100 1100 0001 0001 1101 1011 0111 var CRC32UNIX uint32 = uint32(0x04C11DB7) // Unix cksum var CRC32IEEE uint32 = uint32(0xEDB88320) func byteCRC32add(crc uint32,str[]byte,len uint64)(uint32){ var i uint64 for i = 0; i < len; i++ { var oct = str[i] for bi := 0; bi < 8; bi++ { ovf1 := (crc & 0x80000000) != 0 ovf2 := (oct & 0x80) != 0 ovf := (ovf1 && !ovf2) || (!ovf1 && ovf2) oct <<= 1 crc <<= 1 if ovf { crc ^= CRC32UNIX } } } return crc; } func byteCRC32end(crc uint32, len uint64)(uint32){ var slen = make([]byte,4) var li = 0 for li = 0; li < 4; { slen[li] = byte(len) li += 1 len >>= 8 if( len == 0 ){ break } } crc = byteCRC32add(crc,slen,uint64(li)) crc ^= 0xFFFFFFFF return crc } func byteCRC32(str[]byte,len uint64)(crc uint32){ crc = byteCRC32add(0,str,len) crc = byteCRC32end(crc,len) return crc } func CRC32Finish(crc uint32, table *crc32.Table, len uint64)(uint32){ var slen = make([]byte,4) var li = 0 for li = 0; li < 4; { slen[li] = byte(len & 0xFF) li += 1 len >>= 8 if( len == 0 ){ break } } crc = crc32.Update(crc,table,slen) crc ^= 0xFFFFFFFF return crc } func (gsh*GshContext)xCksum(path string,argv[]string, sum*CheckSum)(int64){ if isin("-type/f",argv) && !IsRegFile(path){ return 0 } if isin("-type/d",argv) && IsRegFile(path){ return 0 } file, err := os.OpenFile(path,os.O_RDONLY,0) if err != nil { fmt.Printf("--E-- cksum %v (%v)\n",path,err) return -1 } defer file.Close() if gsh.CmdTrace { fmt.Printf("--I-- cksum %v %v\n",path,argv) } bi := 0 var buff = make([]byte,32*1024) var total int64 = 0 var initTime = time.Time{} if sum.Start == initTime { sum.Start = time.Now() } for bi = 0; ; bi++ { count,err := file.Read(buff) if count <= 0 || err != nil { break } if (sum.SumType & SUM_SUM64) != 0 { s := sum.Sum64 for _,c := range buff[0:count] { s += uint64(c) } sum.Sum64 = s } if (sum.SumType & SUM_UNIXFILE) != 0 { sum.Crc32Val = byteCRC32add(sum.Crc32Val,buff,uint64(count)) } if (sum.SumType & SUM_CRCIEEE) != 0 { sum.Crc32Val = crc32.Update(sum.Crc32Val,&sum.Crc32Table,buff[0:count]) } // BSD checksum if (sum.SumType & SUM_SUM16_BSD) != 0 { s := sum.Sum16 for _,c := range buff[0:count] { s = (s >> 1) + ((s & 1) << 15) s += int(c) s &= 0xFFFF //fmt.Printf("BSDsum: %d[%d] %d\n",sum.Size+int64(i),i,s) } sum.Sum16 = s } if (sum.SumType & SUM_SUM16_SYSV) != 0 { for bj := 0; bj < count; bj++ { sum.Sum16 += int(buff[bj]) } } total += int64(count) } sum.Done = time.Now() sum.Files += 1 sum.Size += total if !isin("-s",argv) { fmt.Printf("%v ",total) } return 0 } // grep // "lines", "lin" or "lnp" for "(text) line processor" or "scanner" // a*,!ab,c, ... sequentioal combination of patterns // what "LINE" is should be definable // generic line-by-line processing // grep [-v] // cat -n -v // uniq [-c] // tail -f // sed s/x/y/ or awk // grep with line count like wc // rewrite contents if specified func (gsh*GshContext)xGrep(path string,rexpv[]string)(int){ file, err := os.OpenFile(path,os.O_RDONLY,0) if err != nil { fmt.Printf("--E-- grep %v (%v)\n",path,err) return -1 } defer file.Close() if gsh.CmdTrace { fmt.Printf("--I-- grep %v %v\n",path,rexpv) } //reader := bufio.NewReaderSize(file,LINESIZE) reader := bufio.NewReaderSize(file,80) li := 0 found := 0 for li = 0; ; li++ { line, err := reader.ReadString('\n') if len(line) <= 0 { break } if 150 < len(line) { // maybe binary break; } if err != nil { break } if 0 <= strings.Index(string(line),rexpv[0]) { found += 1 fmt.Printf("%s:%d: %s",path,li,line) } } //fmt.Printf("total %d lines %s\n",li,path) //if( 0 < found ){ fmt.Printf("((found %d lines %s))\n",found,path); } return found } // Finder // finding files with it name and contents // file names are ORed // show the content with %x fmt list // ls -R // tar command by adding output type fileSum struct { Err int64 // access error or so Size int64 // content size DupSize int64 // content size from hard links Blocks int64 // number of blocks (of 512 bytes) DupBlocks int64 // Blocks pointed from hard links HLinks int64 // hard links Words int64 Lines int64 Files int64 Dirs int64 // the num. of directories SymLink int64 Flats int64 // the num. of flat files MaxDepth int64 MaxNamlen int64 // max. name length nextRepo time.Time } func showFusage(dir string,fusage *fileSum){ bsume := float64(((fusage.Blocks-fusage.DupBlocks)/2)*1024)/1000000.0 //bsumdup := float64((fusage.Blocks/2)*1024)/1000000.0 fmt.Printf("%v: %v files (%vd %vs %vh) %.6f MB (%.2f MBK)\n", dir, fusage.Files, fusage.Dirs, fusage.SymLink, fusage.HLinks, float64(fusage.Size)/1000000.0,bsume); } const ( S_IFMT = 0170000 S_IFCHR = 0020000 S_IFDIR = 0040000 S_IFREG = 0100000 S_IFLNK = 0120000 S_IFSOCK = 0140000 ) func cumFinfo(fsum *fileSum, path string, staterr error, fstat syscall.Stat_t, argv[]string,verb bool)(*fileSum){ now := time.Now() if time.Second <= now.Sub(fsum.nextRepo) { if !fsum.nextRepo.IsZero(){ tstmp := now.Format(time.Stamp) showFusage(tstmp,fsum) } fsum.nextRepo = now.Add(time.Second) } if staterr != nil { fsum.Err += 1 return fsum } fsum.Files += 1 if 1 < fstat.Nlink { // must count only once... // at least ignore ones in the same directory //if finfo.Mode().IsRegular() { if (fstat.Mode & S_IFMT) == S_IFREG { fsum.HLinks += 1 fsum.DupBlocks += int64(fstat.Blocks) //fmt.Printf("---Dup HardLink %v %s\n",fstat.Nlink,path) } } //fsum.Size += finfo.Size() fsum.Size += fstat.Size fsum.Blocks += int64(fstat.Blocks) //if verb { fmt.Printf("(%8dBlk) %s",fstat.Blocks/2,path) } if isin("-ls",argv){ //if verb { fmt.Printf("%4d %8d ",fstat.Blksize,fstat.Blocks) } // fmt.Printf("%d\t",fstat.Blocks/2) } //if finfo.IsDir() if (fstat.Mode & S_IFMT) == S_IFDIR { fsum.Dirs += 1 } //if (finfo.Mode() & os.ModeSymlink) != 0 if (fstat.Mode & S_IFMT) == S_IFLNK { //if verb { fmt.Printf("symlink(%v,%s)\n",fstat.Mode,finfo.Name()) } //{ fmt.Printf("symlink(%o,%s)\n",fstat.Mode,finfo.Name()) } fsum.SymLink += 1 } return fsum } func (gsh*GshContext)xxFindEntv(depth int,total *fileSum,dir string, dstat syscall.Stat_t, ei int, entv []string,npatv[]string,argv[]string)(*fileSum){ nols := isin("-grep",argv) // sort entv /* if isin("-t",argv){ sort.Slice(filev, func(i,j int) bool { return 0 < filev[i].ModTime().Sub(filev[j].ModTime()) }) } */ /* if isin("-u",argv){ sort.Slice(filev, func(i,j int) bool { return 0 < filev[i].AccTime().Sub(filev[j].AccTime()) }) } if isin("-U",argv){ sort.Slice(filev, func(i,j int) bool { return 0 < filev[i].CreatTime().Sub(filev[j].CreatTime()) }) } */ /* if isin("-S",argv){ sort.Slice(filev, func(i,j int) bool { return filev[j].Size() < filev[i].Size() }) } */ for _,filename := range entv { for _,npat := range npatv { match := true if npat == "*" { match = true }else{ match, _ = filepath.Match(npat,filename) } path := dir + DIRSEP + filename if !match { continue } var fstat syscall.Stat_t staterr := syscall.Lstat(path,&fstat) if staterr != nil { if !isin("-w",argv){fmt.Printf("ufind: %v\n",staterr) } continue; } if isin("-du",argv) && (fstat.Mode & S_IFMT) == S_IFDIR { // should not show size of directory in "-du" mode ... }else if !nols && !isin("-s",argv) && (!isin("-du",argv) || isin("-a",argv)) { if isin("-du",argv) { fmt.Printf("%d\t",fstat.Blocks/2) } showFileInfo(path,argv) } if true { // && isin("-du",argv) total = cumFinfo(total,path,staterr,fstat,argv,false) } /* if isin("-wc",argv) { } */ if gsh.lastCheckSum.SumType != 0 { gsh.xCksum(path,argv,&gsh.lastCheckSum); } x := isinX("-grep",argv); // -grep will be convenient like -ls if 0 <= x && x+1 <= len(argv) { // -grep will be convenient like -ls if IsRegFile(path){ found := gsh.xGrep(path,argv[x+1:]) if 0 < found { foundv := gsh.CmdCurrent.FoundFile if len(foundv) < 10 { gsh.CmdCurrent.FoundFile = append(gsh.CmdCurrent.FoundFile,path) } } } } if !isin("-r0",argv) { // -d 0 in du, -depth n in find //total.Depth += 1 if (fstat.Mode & S_IFMT) == S_IFLNK { continue } if dstat.Rdev != fstat.Rdev { fmt.Printf("--I-- don't follow differnet device %v(%v) %v(%v)\n", dir,dstat.Rdev,path,fstat.Rdev) } if (fstat.Mode & S_IFMT) == S_IFDIR { total = gsh.xxFind(depth+1,total,path,npatv,argv) } } } } return total } func (gsh*GshContext)xxFind(depth int,total *fileSum,dir string,npatv[]string,argv[]string)(*fileSum){ nols := isin("-grep",argv) dirfile,oerr := os.OpenFile(dir,os.O_RDONLY,0) if oerr == nil { //fmt.Printf("--I-- %v(%v)[%d]\n",dir,dirfile,dirfile.Fd()) defer dirfile.Close() }else{ } prev := *total var dstat syscall.Stat_t staterr := syscall.Lstat(dir,&dstat) // should be flstat if staterr != nil { if !isin("-w",argv){ fmt.Printf("ufind: %v\n",staterr) } return total } //filev,err := ioutil.ReadDir(dir) //_,err := ioutil.ReadDir(dir) // ReadDir() heavy and bad for huge directory /* if err != nil { if !isin("-w",argv){ fmt.Printf("ufind: %v\n",err) } return total } */ if depth == 0 { total = cumFinfo(total,dir,staterr,dstat,argv,true) if !nols && !isin("-s",argv) && (!isin("-du",argv) || isin("-a",argv)) { showFileInfo(dir,argv) } } // it it is not a directory, just scan it and finish for ei := 0; ; ei++ { entv,rderr := dirfile.Readdirnames(8*1024) if len(entv) == 0 || rderr != nil { //if rderr != nil { fmt.Printf("[%d] len=%d (%v)\n",ei,len(entv),rderr) } break } if 0 < ei { fmt.Printf("--I-- xxFind[%d] %d large-dir: %s\n",ei,len(entv),dir) } total = gsh.xxFindEntv(depth,total,dir,dstat,ei,entv,npatv,argv) } if isin("-du",argv) { // if in "du" mode fmt.Printf("%d\t%s\n",(total.Blocks-prev.Blocks)/2,dir) } return total } // {ufind|fu|ls} [Files] [// Names] [-- Expressions] // Files is "." by default // Names is "*" by default // Expressions is "-print" by default for "ufind", or -du for "fu" command func (gsh*GshContext)xFind(argv[]string){ if 0 < len(argv) && strBegins(argv[0],"?"){ showFound(gsh,argv) return } if isin("-cksum",argv) || isin("-sum",argv) { gsh.lastCheckSum = CheckSum{} if isin("-sum",argv) && isin("-add",argv) { gsh.lastCheckSum.SumType |= SUM_SUM64 }else if isin("-sum",argv) && isin("-size",argv) { gsh.lastCheckSum.SumType |= SUM_SIZE }else if isin("-sum",argv) && isin("-bsd",argv) { gsh.lastCheckSum.SumType |= SUM_SUM16_BSD }else if isin("-sum",argv) && isin("-sysv",argv) { gsh.lastCheckSum.SumType |= SUM_SUM16_SYSV }else if isin("-sum",argv) { gsh.lastCheckSum.SumType |= SUM_SUM64 } if isin("-unix",argv) { gsh.lastCheckSum.SumType |= SUM_UNIXFILE gsh.lastCheckSum.Crc32Table = *crc32.MakeTable(CRC32UNIX) } if isin("-ieee",argv){ gsh.lastCheckSum.SumType |= SUM_CRCIEEE gsh.lastCheckSum.Crc32Table = *crc32.MakeTable(CRC32IEEE) } gsh.lastCheckSum.RusgAtStart = Getrusagev() } var total = fileSum{} npats := []string{} for _,v := range argv { if 0 < len(v) && v[0] != '-' { npats = append(npats,v) } if v == "//" { break } if v == "--" { break } if v == "-grep" { break } if v == "-ls" { break } } if len(npats) == 0 { npats = []string{"*"} } cwd := "." // if to be fullpath ::: cwd, _ := os.Getwd() if len(npats) == 0 { npats = []string{"*"} } fusage := gsh.xxFind(0,&total,cwd,npats,argv) if gsh.lastCheckSum.SumType != 0 { var sumi uint64 = 0 sum := &gsh.lastCheckSum if (sum.SumType & SUM_SIZE) != 0 { sumi = uint64(sum.Size) } if (sum.SumType & SUM_SUM64) != 0 { sumi = sum.Sum64 } if (sum.SumType & SUM_SUM16_SYSV) != 0 { s := uint32(sum.Sum16) r := (s & 0xFFFF) + ((s & 0xFFFFFFFF) >> 16) s = (r & 0xFFFF) + (r >> 16) sum.Crc32Val = uint32(s) sumi = uint64(s) } if (sum.SumType & SUM_SUM16_BSD) != 0 { sum.Crc32Val = uint32(sum.Sum16) sumi = uint64(sum.Sum16) } if (sum.SumType & SUM_UNIXFILE) != 0 { sum.Crc32Val = byteCRC32end(sum.Crc32Val,uint64(sum.Size)) sumi = uint64(byteCRC32end(sum.Crc32Val,uint64(sum.Size))) } if 1 < sum.Files { fmt.Printf("%v %v // %v / %v files, %v/file\r\n", sumi,sum.Size, abssize(sum.Size),sum.Files, abssize(sum.Size/sum.Files)) }else{ fmt.Printf("%v %v %v\n", sumi,sum.Size,npats[0]) } } if !isin("-grep",argv) { showFusage("total",fusage) } if !isin("-s",argv){ hits := len(gsh.CmdCurrent.FoundFile) if 0 < hits { fmt.Printf("--I-- %d files hits // can be refered with !%df\n", hits,len(gsh.CommandHistory)) } } if gsh.lastCheckSum.SumType != 0 { if isin("-ru",argv) { sum := &gsh.lastCheckSum sum.Done = time.Now() gsh.lastCheckSum.RusgAtEnd = Getrusagev() elps := sum.Done.Sub(sum.Start) fmt.Printf("--cksum-size: %v (%v) / %v files, %v/file\r\n", sum.Size,abssize(sum.Size),sum.Files,abssize(sum.Size/sum.Files)) nanos := int64(elps) fmt.Printf("--cksum-time: %v/total, %v/file, %.1f files/s, %v\r\n", abbtime(nanos), abbtime(nanos/sum.Files), (float64(sum.Files)*1000000000.0)/float64(nanos), abbspeed(sum.Size,nanos)) diff := RusageSubv(sum.RusgAtEnd,sum.RusgAtStart) fmt.Printf("--cksum-rusg: %v\n",sRusagef("",argv,diff)) } } return } func showFiles(files[]string){ sp := "" for i,file := range files { if 0 < i { sp = " " } else { sp = "" } fmt.Printf(sp+"%s",escapeWhiteSP(file)) } } func showFound(gshCtx *GshContext, argv[]string){ for i,v := range gshCtx.CommandHistory { if 0 < len(v.FoundFile) { fmt.Printf("!%d (%d) ",i,len(v.FoundFile)) if isin("-ls",argv){ fmt.Printf("\n") for _,file := range v.FoundFile { fmt.Printf("") //sub number? showFileInfo(file,argv) } }else{ showFiles(v.FoundFile) fmt.Printf("\n") } } } } func showMatchFile(filev []os.FileInfo, npat,dir string, argv[]string)(string,bool){ fname := "" found := false for _,v := range filev { match, _ := filepath.Match(npat,(v.Name())) if match { fname = v.Name() found = true //fmt.Printf("[%d] %s\n",i,v.Name()) showIfExecutable(fname,dir,argv) } } return fname,found } func showIfExecutable(name,dir string,argv[]string)(ffullpath string,ffound bool){ var fullpath string if strBegins(name,DIRSEP){ fullpath = name }else{ fullpath = dir + DIRSEP + name } fi, err := os.Stat(fullpath) if err != nil { fullpath = dir + DIRSEP + name + ".go" fi, err = os.Stat(fullpath) } if err == nil { fm := fi.Mode() if fm.IsRegular() { // R_OK=4, W_OK=2, X_OK=1, F_OK=0 if syscall.Access(fullpath,5) == nil { ffullpath = fullpath ffound = true if ! isin("-s", argv) { showFileInfo(fullpath,argv) } } } } return ffullpath, ffound } func which(list string, argv []string) (fullpathv []string, itis bool){ if len(argv) <= 1 { fmt.Printf("Usage: which comand [-s] [-a] [-ls]\n") return []string{""}, false } path := argv[1] if strBegins(path,"/") { // should check if excecutable? _,exOK := showIfExecutable(path,"/",argv) fmt.Printf("--D-- %v exOK=%v\n",path,exOK) return []string{path},exOK } pathenv, efound := os.LookupEnv(list) if ! efound { fmt.Printf("--E-- which: no \"%s\" environment\n",list) return []string{""}, false } showall := isin("-a",argv) || 0 <= strings.Index(path,"*") dirv := strings.Split(pathenv,PATHSEP) ffound := false ffullpath := path for _, dir := range dirv { if 0 <= strings.Index(path,"*") { // by wild-card list,_ := ioutil.ReadDir(dir) ffullpath, ffound = showMatchFile(list,path,dir,argv) }else{ ffullpath, ffound = showIfExecutable(path,dir,argv) } //if ffound && !isin("-a", argv) { if ffound && !showall { break; } } return []string{ffullpath}, ffound } func stripLeadingWSParg(argv[]string)([]string){ for ; 0 < len(argv); { if len(argv[0]) == 0 { argv = argv[1:] }else{ break } } return argv } func xEval(argv []string, nlend bool){ argv = stripLeadingWSParg(argv) if len(argv) == 0 { fmt.Printf("eval [%%format] [Go-expression]\n") return } pfmt := "%v" if argv[0][0] == '%' { pfmt = argv[0] argv = argv[1:] } if len(argv) == 0 { return } gocode := strings.Join(argv," "); //fmt.Printf("eval [%v] [%v]\n",pfmt,gocode) fset := token.NewFileSet() rval, _ := types.Eval(fset,nil,token.NoPos,gocode) fmt.Printf(pfmt,rval.Value) if nlend { fmt.Printf("\n") } } func getval(name string) (found bool, val int) { /* should expand the name here */ if name == "gsh.pid" { return true, os.Getpid() }else if name == "gsh.ppid" { return true, os.Getppid() } return false, 0 } func echo(argv []string, nlend bool){ for ai := 1; ai < len(argv); ai++ { if 1 < ai { fmt.Printf(" "); } arg := argv[ai] found, val := getval(arg) if found { fmt.Printf("%d",val) }else{ fmt.Printf("%s",arg) } } if nlend { fmt.Printf("\n"); } } func resfile() string { return "gsh.tmp" } //var resF *File func resmap() { //_ , err := os.OpenFile(resfile(), os.O_RDWR|os.O_CREATE, os.ModeAppend) // https://developpaper.com/solution-to-golang-bad-file-descriptor-problem/ _ , err := os.OpenFile(resfile(), os.O_RDWR|os.O_CREATE, 0600) if err != nil { fmt.Printf("refF could not open: %s\n",err) }else{ fmt.Printf("refF opened\n") } } // @@2020-0821 func gshScanArg(str string,strip int)(argv []string){ var si = 0 var sb = 0 var inBracket = 0 var arg1 = make([]byte,LINESIZE) var ax = 0 debug := false for ; si < len(str); si++ { if str[si] != ' ' { break } } sb = si for ; si < len(str); si++ { if sb <= si { if debug { fmt.Printf("--Da- +%d %2d-%2d %s ... %s\n", inBracket,sb,si,arg1[0:ax],str[si:]) } } ch := str[si] if ch == '{' { inBracket += 1 if 0 < strip && inBracket <= strip { //fmt.Printf("stripLEV %d <= %d?\n",inBracket,strip) continue } } if 0 < inBracket { if ch == '}' { inBracket -= 1 if 0 < strip && inBracket < strip { //fmt.Printf("stripLEV %d < %d?\n",inBracket,strip) continue } } arg1[ax] = ch ax += 1 continue } if str[si] == ' ' { argv = append(argv,string(arg1[0:ax])) if debug { fmt.Printf("--Da- [%v][%v-%v] %s ... %s\n", -1+len(argv),sb,si,str[sb:si],string(str[si:])) } sb = si+1 ax = 0 continue } arg1[ax] = ch ax += 1 } if sb < si { argv = append(argv,string(arg1[0:ax])) if debug { fmt.Printf("--Da- [%v][%v-%v] %s ... %s\n", -1+len(argv),sb,si,string(arg1[0:ax]),string(str[si:])) } } if debug { fmt.Printf("--Da- %d [%s] => [%d]%v\n",strip,str,len(argv),argv) } return argv } // should get stderr (into tmpfile ?) and return func (gsh*GshContext)Popen(name,mode string)(pin*os.File,pout*os.File,err bool){ var pv = []int{-1,-1} syscall.Pipe(pv) xarg := gshScanArg(name,1) name = strings.Join(xarg," ") pin = os.NewFile(uintptr(pv[0]),"StdoutOf-{"+name+"}") pout = os.NewFile(uintptr(pv[1]),"StdinOf-{"+name+"}") fdix := 0 dir := "?" if mode == "r" { dir = "<" fdix = 1 // read from the stdout of the process }else{ dir = ">" fdix = 0 // write to the stdin of the process } gshPA := gsh.gshPA savfd := gshPA.Files[fdix] var fd uintptr = 0 if mode == "r" { fd = pout.Fd() gshPA.Files[fdix] = pout.Fd() }else{ fd = pin.Fd() gshPA.Files[fdix] = pin.Fd() } // should do this by Goroutine? if false { fmt.Printf("--Ip- Opened fd[%v] %s %v\n",fd,dir,name) fmt.Printf("--RED1 [%d,%d,%d]->[%d,%d,%d]\n", os.Stdin.Fd(),os.Stdout.Fd(),os.Stderr.Fd(), pin.Fd(),pout.Fd(),pout.Fd()) } savi := os.Stdin savo := os.Stdout save := os.Stderr os.Stdin = pin os.Stdout = pout os.Stderr = pout gsh.BackGround = true gsh.gshelllh(name) gsh.BackGround = false os.Stdin = savi os.Stdout = savo os.Stderr = save gshPA.Files[fdix] = savfd return pin,pout,false } // External commands func (gsh*GshContext)excommand(exec bool, argv []string) (notf bool,exit bool) { if gsh.CmdTrace { fmt.Printf("--I-- excommand[%v](%v)\n",exec,argv) } gshPA := gsh.gshPA fullpathv, itis := which("PATH",[]string{"which",argv[0],"-s"}) if itis == false { return true,false } fullpath := fullpathv[0] argv = unescapeWhiteSPV(argv) if 0 < strings.Index(fullpath,".go") { nargv := argv // []string{} gofullpathv, itis := which("PATH",[]string{"which","go","-s"}) if itis == false { fmt.Printf("--F-- Go not found\n") return false,true } gofullpath := gofullpathv[0] nargv = []string{ gofullpath, "run", fullpath } fmt.Printf("--I-- %s {%s %s %s}\n",gofullpath, nargv[0],nargv[1],nargv[2]) if exec { syscall.Exec(gofullpath,nargv,os.Environ()) }else{ pid, _ := syscall.ForkExec(gofullpath,nargv,&gshPA) if gsh.BackGround { fmt.Fprintf(stderr,"--Ip- in Background pid[%d]%d(%v)\n",pid,len(argv),nargv) gsh.BackGroundJobs = append(gsh.BackGroundJobs,pid) }else{ rusage := syscall.Rusage {} syscall.Wait4(pid,nil,0,&rusage) gsh.LastRusage = rusage gsh.CmdCurrent.Rusagev[1] = rusage } } }else{ if exec { syscall.Exec(fullpath,argv,os.Environ()) }else{ pid, _ := syscall.ForkExec(fullpath,argv,&gshPA) //fmt.Printf("[%d]\n",pid); // '&' to be background if gsh.BackGround { fmt.Fprintf(stderr,"--Ip- in Background pid[%d]%d(%v)\n",pid,len(argv),argv) gsh.BackGroundJobs = append(gsh.BackGroundJobs,pid) }else{ rusage := syscall.Rusage {} syscall.Wait4(pid,nil,0,&rusage); gsh.LastRusage = rusage gsh.CmdCurrent.Rusagev[1] = rusage } } } return false,false } // Builtin Commands func (gshCtx *GshContext) sleep(argv []string) { if len(argv) < 2 { fmt.Printf("Sleep 100ms, 100us, 100ns, ...\n") return } duration := argv[1]; d, err := time.ParseDuration(duration) if err != nil { d, err = time.ParseDuration(duration+"s") if err != nil { fmt.Printf("duration ? %s (%s)\n",duration,err) return } } //fmt.Printf("Sleep %v\n",duration) time.Sleep(d) if 0 < len(argv[2:]) { gshCtx.gshellv(argv[2:]) } } func (gshCtx *GshContext)repeat(argv []string) { if len(argv) < 2 { return } start0 := time.Now() for ri,_ := strconv.Atoi(argv[1]); 0 < ri; ri-- { if 0 < len(argv[2:]) { //start := time.Now() gshCtx.gshellv(argv[2:]) end := time.Now() elps := end.Sub(start0); if( 1000000000 < elps ){ fmt.Printf("(repeat#%d %v)\n",ri,elps); } } } } func (gshCtx *GshContext)gen(argv []string) { gshPA := gshCtx.gshPA if len(argv) < 2 { fmt.Printf("Usage: %s N\n",argv[0]) return } // should br repeated by "repeat" command count, _ := strconv.Atoi(argv[1]) fd := gshPA.Files[1] // Stdout file := os.NewFile(fd,"internalStdOut") fmt.Printf("--I-- Gen. Count=%d to [%d]\n",count,file.Fd()) //buf := []byte{} outdata := "0123 5678 0123 5678 0123 5678 0123 5678\r" for gi := 0; gi < count; gi++ { file.WriteString(outdata) } //file.WriteString("\n") fmt.Printf("\n(%d B)\n",count*len(outdata)); //file.Close() } // Remote Execution // 2020-0820 func Elapsed(from time.Time)(string){ elps := time.Now().Sub(from) if 1000000000 < elps { return fmt.Sprintf("[%5d.%02ds]",elps/1000000000,(elps%1000000000)/10000000) }else if 1000000 < elps { return fmt.Sprintf("[%3d.%03dms]",elps/1000000,(elps%1000000)/1000) }else{ return fmt.Sprintf("[%3d.%03dus]",elps/1000,(elps%1000)) } } func abbtime(nanos int64)(string){ if 1000000000 < nanos { return fmt.Sprintf("%d.%02ds",nanos/1000000000,(nanos%1000000000)/10000000) }else if 1000000 < nanos { return fmt.Sprintf("%d.%03dms",nanos/1000000,(nanos%1000000)/1000) }else{ return fmt.Sprintf("%d.%03dus",nanos/1000,(nanos%1000)) } } func abssize(size int64)(string){ fsize := float64(size) if 1024*1024*1024 < size { return fmt.Sprintf("%.2fGiB",fsize/(1024*1024*1024)) }else if 1024*1024 < size { return fmt.Sprintf("%.3fMiB",fsize/(1024*1024)) }else{ return fmt.Sprintf("%.3fKiB",fsize/1024) } } func absize(size int64)(string){ fsize := float64(size) if 1024*1024*1024 < size { return fmt.Sprintf("%8.2fGiB",fsize/(1024*1024*1024)) }else if 1024*1024 < size { return fmt.Sprintf("%8.3fMiB",fsize/(1024*1024)) }else{ return fmt.Sprintf("%8.3fKiB",fsize/1024) } } func abbspeed(totalB int64,ns int64)(string){ MBs := (float64(totalB)/1000000) / (float64(ns)/1000000000) if 1000 <= MBs { return fmt.Sprintf("%6.3fGB/s",MBs/1000) } if 1 <= MBs { return fmt.Sprintf("%6.3fMB/s",MBs) }else{ return fmt.Sprintf("%6.3fKB/s",MBs*1000) } } func abspeed(totalB int64,ns time.Duration)(string){ MBs := (float64(totalB)/1000000) / (float64(ns)/1000000000) if 1000 <= MBs { return fmt.Sprintf("%6.3fGBps",MBs/1000) } if 1 <= MBs { return fmt.Sprintf("%6.3fMBps",MBs) }else{ return fmt.Sprintf("%6.3fKBps",MBs*1000) } } func fileRelay(what string,in*os.File,out*os.File,size int64,bsiz int)(wcount int64){ Start := time.Now() buff := make([]byte,bsiz) var total int64 = 0 var rem int64 = size nio := 0 Prev := time.Now() var PrevSize int64 = 0 fmt.Printf(Elapsed(Start)+"--In- X: %s (%v/%v/%v) START\n", what,absize(total),size,nio) for i:= 0; ; i++ { var len = bsiz if int(rem) < len { len = int(rem) } Now := time.Now() Elps := Now.Sub(Prev); if 1000000000 < Now.Sub(Prev) { fmt.Printf(Elapsed(Start)+"--In- X: %s (%v/%v/%v) %s\n", what,absize(total),size,nio, abspeed((total-PrevSize),Elps)) Prev = Now; PrevSize = total } rlen := len if in != nil { // should watch the disconnection of out rcc,err := in.Read(buff[0:rlen]) if err != nil { fmt.Printf(Elapsed(Start)+"--En- X: %s read(%v,%v)<%v\n", what,rcc,err,in.Name()) break } rlen = rcc if string(buff[0:10]) == "((SoftEOF " { var ecc int64 = 0 fmt.Sscanf(string(buff),"((SoftEOF %v",&ecc) fmt.Printf(Elapsed(Start)+"--En- X: %s Recv ((SoftEOF %v))/%v\n", what,ecc,total) if ecc == total { break } } } wlen := rlen if out != nil { wcc,err := out.Write(buff[0:rlen]) if err != nil { fmt.Printf(Elapsed(Start)+"-En-- X: %s write(%v,%v)>%v\n", what,wcc,err,out.Name()) break } wlen = wcc } if wlen < rlen { fmt.Printf(Elapsed(Start)+"--En- X: %s incomplete write (%v/%v)\n", what,wlen,rlen) break; } nio += 1 total += int64(rlen) rem -= int64(rlen) if rem <= 0 { break } } Done := time.Now() Elps := float64(Done.Sub(Start))/1000000000 //Seconds TotalMB := float64(total)/1000000 //MB MBps := TotalMB / Elps fmt.Printf(Elapsed(Start)+"--In- X: %s (%v/%v/%v) %v %.3fMB/s\n", what,total,size,nio,absize(total),MBps) return total } func tcpPush(clnt *os.File){ // shrink socket buffer and recover usleep(100); } func (gsh*GshContext)RexecServer(argv[]string){ debug := true Start0 := time.Now() Start := Start0 // if local == ":" { local = "0.0.0.0:9999" } local := "0.0.0.0:9999" if 0 < len(argv) { if argv[0] == "-s" { debug = false argv = argv[1:] } } if 0 < len(argv) { argv = argv[1:] } port, err := net.ResolveTCPAddr("tcp",local); if err != nil { fmt.Printf("--En- S: Address error: %s (%s)\n",local,err) return } fmt.Printf(Elapsed(Start)+"--In- S: Listening at %s...\n",local); sconn, err := net.ListenTCP("tcp", port) if err != nil { fmt.Printf(Elapsed(Start)+"--En- S: Listen error: %s (%s)\n",local,err) return } reqbuf := make([]byte,LINESIZE) res := "" for { fmt.Printf(Elapsed(Start0)+"--In- S: Listening at %s...\n",local); aconn, err := sconn.AcceptTCP() Start = time.Now() if err != nil { fmt.Printf(Elapsed(Start)+"--En- S: Accept error: %s (%s)\n",local,err) return } clnt, _ := aconn.File() fd := clnt.Fd() ar := aconn.RemoteAddr() if debug { fmt.Printf(Elapsed(Start0)+"--In- S: Accepted TCP at %s [%d] <- %v\n", local,fd,ar) } res = fmt.Sprintf("220 GShell/%s Server\r\n",VERSION) fmt.Fprintf(clnt,"%s",res) if debug { fmt.Printf(Elapsed(Start)+"--In- S: %s",res) } count, err := clnt.Read(reqbuf) if err != nil { fmt.Printf(Elapsed(Start)+"--En- C: (%v %v) %v", count,err,string(reqbuf)) } req := string(reqbuf[:count]) if debug { fmt.Printf(Elapsed(Start)+"--In- C: %v",string(req)) } reqv := strings.Split(string(req),"\r") cmdv := gshScanArg(reqv[0],0) //cmdv := strings.Split(reqv[0]," ") switch cmdv[0] { case "HELO": res = fmt.Sprintf("250 %v",req) case "GET": // download {remotefile|-zN} [localfile] var dsize int64 = 32*1024*1024 var bsize int = 64*1024 var fname string = "" var in *os.File = nil var pseudoEOF = false if 1 < len(cmdv) { fname = cmdv[1] if strBegins(fname,"-z") { fmt.Sscanf(fname[2:],"%d",&dsize) }else if strBegins(fname,"{") { xin,xout,err := gsh.Popen(fname,"r") if err { }else{ xout.Close() defer xin.Close() in = xin dsize = MaxStreamSize pseudoEOF = true } }else{ xin,err := os.Open(fname) if err != nil { fmt.Printf("--En- GET (%v)\n",err) }else{ defer xin.Close() in = xin fi,_ := xin.Stat() dsize = fi.Size() } } } //fmt.Printf(Elapsed(Start)+"--In- GET %v:%v\n",dsize,bsize) res = fmt.Sprintf("200 %v\r\n",dsize) fmt.Fprintf(clnt,"%v",res) tcpPush(clnt); // should be separated as line in receiver fmt.Printf(Elapsed(Start)+"--In- S: %v",res) wcount := fileRelay("SendGET",in,clnt,dsize,bsize) if pseudoEOF { in.Close() // pipe from the command // show end of stream data (its size) by OOB? SoftEOF := fmt.Sprintf("((SoftEOF %v))",wcount) fmt.Printf(Elapsed(Start)+"--In- S: Send %v\n",SoftEOF) tcpPush(clnt); // to let SoftEOF data apper at the top of recevied data fmt.Fprintf(clnt,"%v\r\n",SoftEOF) tcpPush(clnt); // to let SoftEOF alone in a packet (separate with 200 OK) // with client generated random? //fmt.Printf("--In- L: close %v (%v)\n",in.Fd(),in.Name()) } res = fmt.Sprintf("200 GET done\r\n") case "PUT": // upload {srcfile|-zN} [dstfile] var dsize int64 = 32*1024*1024 var bsize int = 64*1024 var fname string = "" var out *os.File = nil if 1 < len(cmdv) { // localfile fmt.Sscanf(cmdv[1],"%d",&dsize) } if 2 < len(cmdv) { fname = cmdv[2] if fname == "-" { // nul dev }else if strBegins(fname,"{") { xin,xout,err := gsh.Popen(fname,"w") if err { }else{ xin.Close() defer xout.Close() out = xout } }else{ // should write to temporary file // should suppress ^C on tty xout,err := os.OpenFile(fname,os.O_CREATE|os.O_RDWR|os.O_TRUNC,0600) //fmt.Printf("--In- S: open(%v) out(%v) err(%v)\n",fname,xout,err) if err != nil { fmt.Printf("--En- PUT (%v)\n",err) }else{ out = xout } } fmt.Printf(Elapsed(Start)+"--In- L: open(%v,w) %v (%v)\n", fname,local,err) } fmt.Printf(Elapsed(Start)+"--In- PUT %v (/%v)\n",dsize,bsize) fmt.Printf(Elapsed(Start)+"--In- S: 200 %v OK\r\n",dsize) fmt.Fprintf(clnt,"200 %v OK\r\n",dsize) fileRelay("RecvPUT",clnt,out,dsize,bsize) res = fmt.Sprintf("200 PUT done\r\n") default: res = fmt.Sprintf("400 What? %v",req) } swcc,serr := clnt.Write([]byte(res)) if serr != nil { fmt.Printf(Elapsed(Start)+"--In- S: (wc=%v er=%v) %v",swcc,serr,res) }else{ fmt.Printf(Elapsed(Start)+"--In- S: %v",res) } aconn.Close(); clnt.Close(); } sconn.Close(); } func (gsh*GshContext)RexecClient(argv[]string)(int,string){ debug := true Start := time.Now() if len(argv) == 1 { return -1,"EmptyARG" } argv = argv[1:] if argv[0] == "-serv" { gsh.RexecServer(argv[1:]) return 0,"Server" } remote := "0.0.0.0:9999" if argv[0][0] == '@' { remote = argv[0][1:] argv = argv[1:] } if argv[0] == "-s" { debug = false argv = argv[1:] } dport, err := net.ResolveTCPAddr("tcp",remote); if err != nil { fmt.Printf(Elapsed(Start)+"Address error: %s (%s)\n",remote,err) return -1,"AddressError" } fmt.Printf(Elapsed(Start)+"--In- C: Connecting to %s\n",remote) serv, err := net.DialTCP("tcp",nil,dport) if err != nil { fmt.Printf(Elapsed(Start)+"Connection error: %s (%s)\n",remote,err) return -1,"CannotConnect" } if debug { al := serv.LocalAddr() fmt.Printf(Elapsed(Start)+"--In- C: Connected to %v <- %v\n",remote,al) } req := "" res := make([]byte,LINESIZE) count,err := serv.Read(res) if err != nil { fmt.Printf("--En- S: (%3d,%v) %v",count,err,string(res)) } if debug { fmt.Printf(Elapsed(Start)+"--In- S: %v",string(res)) } if argv[0] == "GET" { savPA := gsh.gshPA var bsize int = 64*1024 req = fmt.Sprintf("%v\r\n",strings.Join(argv," ")) fmt.Printf(Elapsed(Start)+"--In- C: %v",req) fmt.Fprintf(serv,req) count,err = serv.Read(res) if err != nil { }else{ var dsize int64 = 0 var out *os.File = nil var out_tobeclosed *os.File = nil var fname string = "" var rcode int = 0 var pid int = -1 fmt.Sscanf(string(res),"%d %d",&rcode,&dsize) fmt.Printf(Elapsed(Start)+"--In- S: %v",string(res[0:count])) if 3 <= len(argv) { fname = argv[2] if strBegins(fname,"{") { xin,xout,err := gsh.Popen(fname,"w") if err { }else{ xin.Close() defer xout.Close() out = xout out_tobeclosed = xout pid = 0 // should be its pid } }else{ // should write to temporary file // should suppress ^C on tty xout,err := os.OpenFile(fname,os.O_CREATE|os.O_RDWR|os.O_TRUNC,0600) if err != nil { fmt.Print("--En- %v\n",err) } out = xout //fmt.Printf("--In-- %d > %s\n",out.Fd(),fname) } } in,_ := serv.File() fileRelay("RecvGET",in,out,dsize,bsize) if 0 <= pid { gsh.gshPA = savPA // recovery of Fd(), and more? fmt.Printf(Elapsed(Start)+"--In- L: close Pipe > %v\n",fname) out_tobeclosed.Close() //syscall.Wait4(pid,nil,0,nil) //@@ } } }else if argv[0] == "PUT" { remote, _ := serv.File() var local *os.File = nil var dsize int64 = 32*1024*1024 var bsize int = 64*1024 var ofile string = "-" //fmt.Printf("--I-- Rex %v\n",argv) if 1 < len(argv) { fname := argv[1] if strBegins(fname,"-z") { fmt.Sscanf(fname[2:],"%d",&dsize) }else if strBegins(fname,"{") { xin,xout,err := gsh.Popen(fname,"r") if err { }else{ xout.Close() defer xin.Close() //in = xin local = xin fmt.Printf("--In- [%d] < Upload output of %v\n", local.Fd(),fname) ofile = "-from."+fname dsize = MaxStreamSize } }else{ xlocal,err := os.Open(fname) if err != nil { fmt.Printf("--En- (%s)\n",err) local = nil }else{ local = xlocal fi,_ := local.Stat() dsize = fi.Size() defer local.Close() //fmt.Printf("--I-- Rex in(%v / %v)\n",ofile,dsize) } ofile = fname fmt.Printf(Elapsed(Start)+"--In- L: open(%v,r)=%v %v (%v)\n", fname,dsize,local,err) } } if 2 < len(argv) && argv[2] != "" { ofile = argv[2] //fmt.Printf("(%d)%v B.ofile=%v\n",len(argv),argv,ofile) } //fmt.Printf(Elapsed(Start)+"--I-- Rex out(%v)\n",ofile) fmt.Printf(Elapsed(Start)+"--In- PUT %v (/%v)\n",dsize,bsize) req = fmt.Sprintf("PUT %v %v \r\n",dsize,ofile) if debug { fmt.Printf(Elapsed(Start)+"--In- C: %v",req) } fmt.Fprintf(serv,"%v",req) count,err = serv.Read(res) if debug { fmt.Printf(Elapsed(Start)+"--In- S: %v",string(res[0:count])) } fileRelay("SendPUT",local,remote,dsize,bsize) }else{ req = fmt.Sprintf("%v\r\n",strings.Join(argv," ")) if debug { fmt.Printf(Elapsed(Start)+"--In- C: %v",req) } fmt.Fprintf(serv,"%v",req) //fmt.Printf("--In- sending RexRequest(%v)\n",len(req)) } //fmt.Printf(Elapsed(Start)+"--In- waiting RexResponse...\n") count,err = serv.Read(res) ress := "" if count == 0 { ress = "(nil)\r\n" }else{ ress = string(res[:count]) } if err != nil { fmt.Printf(Elapsed(Start)+"--En- S: (%d,%v) %v",count,err,ress) }else{ fmt.Printf(Elapsed(Start)+"--In- S: %v",ress) } serv.Close() //conn.Close() var stat string var rcode int fmt.Sscanf(ress,"%d %s",&rcode,&stat) //fmt.Printf("--D-- Client: %v (%v)",rcode,stat) return rcode,ress } // Remote Shell // gcp file [...] { [host]:[port:][dir] | dir } // -p | -no-p func (gsh*GshContext)FileCopy(argv[]string){ var host = "" var port = "" var upload = false var download = false var xargv = []string{"rex-gcp"} var srcv = []string{} var dstv = []string{} argv = argv[1:] for _,v := range argv { /* if v[0] == '-' { // might be a pseudo file (generated date) continue } */ obj := strings.Split(v,":") //fmt.Printf("%d %v %v\n",len(obj),v,obj) if 1 < len(obj) { host = obj[0] file := "" if 0 < len(host) { gsh.LastServer.host = host }else{ host = gsh.LastServer.host port = gsh.LastServer.port } if 2 < len(obj) { port = obj[1] if 0 < len(port) { gsh.LastServer.port = port }else{ port = gsh.LastServer.port } file = obj[2] }else{ file = obj[1] } if len(srcv) == 0 { download = true srcv = append(srcv,file) continue } upload = true dstv = append(dstv,file) continue } /* idx := strings.Index(v,":") if 0 <= idx { remote = v[0:idx] if len(srcv) == 0 { download = true srcv = append(srcv,v[idx+1:]) continue } upload = true dstv = append(dstv,v[idx+1:]) continue } */ if download { dstv = append(dstv,v) }else{ srcv = append(srcv,v) } } hostport := "@" + host + ":" + port if upload { if host != "" { xargv = append(xargv,hostport) } xargv = append(xargv,"PUT") xargv = append(xargv,srcv[0:]...) xargv = append(xargv,dstv[0:]...) //fmt.Printf("--I-- FileCopy PUT gsh://%s/%v < %v // %v\n",hostport,dstv,srcv,xargv) fmt.Printf("--I-- FileCopy PUT gsh://%s/%v < %v\n",hostport,dstv,srcv) gsh.RexecClient(xargv) }else if download { if host != "" { xargv = append(xargv,hostport) } xargv = append(xargv,"GET") xargv = append(xargv,srcv[0:]...) xargv = append(xargv,dstv[0:]...) //fmt.Printf("--I-- FileCopy GET gsh://%v/%v > %v // %v\n",hostport,srcv,dstv,xargv) fmt.Printf("--I-- FileCopy GET gsh://%v/%v > %v\n",hostport,srcv,dstv) gsh.RexecClient(xargv) }else{ } } // target func (gsh*GshContext)Trelpath(rloc string)(string){ cwd, _ := os.Getwd() os.Chdir(gsh.RWD) os.Chdir(rloc) twd, _ := os.Getwd() os.Chdir(cwd) tpath := twd + "/" + rloc return tpath } // join to rmote GShell - [user@]host[:port] or cd host:[port]:path func (gsh*GshContext)Rjoin(argv[]string){ if len(argv) <= 1 { fmt.Printf("--I-- current server = %v\n",gsh.RSERV) return } serv := argv[1] servv := strings.Split(serv,":") if 1 <= len(servv) { if servv[0] == "lo" { servv[0] = "localhost" } } switch len(servv) { case 1: //if strings.Index(serv,":") < 0 { serv = servv[0] + ":" + fmt.Sprintf("%d",GSH_PORT) //} case 2: // host:port serv = strings.Join(servv,":") } xargv := []string{"rex-join","@"+serv,"HELO"} rcode,stat := gsh.RexecClient(xargv) if (rcode / 100) == 2 { fmt.Printf("--I-- OK Joined (%v) %v\n",rcode,stat) gsh.RSERV = serv }else{ fmt.Printf("--I-- NG, could not joined (%v) %v\n",rcode,stat) } } func (gsh*GshContext)Rexec(argv[]string){ if len(argv) <= 1 { fmt.Printf("--I-- rexec command [ | {file || {command} ]\n",gsh.RSERV) return } /* nargv := gshScanArg(strings.Join(argv," "),0) fmt.Printf("--D-- nargc=%d [%v]\n",len(nargv),nargv) if nargv[1][0] != '{' { nargv[1] = "{" + nargv[1] + "}" fmt.Printf("--D-- nargc=%d [%v]\n",len(nargv),nargv) } argv = nargv */ nargv := []string{} nargv = append(nargv,"{"+strings.Join(argv[1:]," ")+"}") fmt.Printf("--D-- nargc=%d %v\n",len(nargv),nargv) argv = nargv xargv := []string{"rex-exec","@"+gsh.RSERV,"GET"} xargv = append(xargv,argv...) xargv = append(xargv,"/dev/tty") rcode,stat := gsh.RexecClient(xargv) if (rcode / 100) == 2 { fmt.Printf("--I-- OK Rexec (%v) %v\n",rcode,stat) }else{ fmt.Printf("--I-- NG Rexec (%v) %v\n",rcode,stat) } } func (gsh*GshContext)Rchdir(argv[]string){ if len(argv) <= 1 { return } cwd, _ := os.Getwd() os.Chdir(gsh.RWD) os.Chdir(argv[1]) twd, _ := os.Getwd() gsh.RWD = twd fmt.Printf("--I-- JWD=%v\n",twd) os.Chdir(cwd) } func (gsh*GshContext)Rpwd(argv[]string){ fmt.Printf("%v\n",gsh.RWD) } func (gsh*GshContext)Rls(argv[]string){ cwd, _ := os.Getwd() os.Chdir(gsh.RWD) argv[0] = "-ls" gsh.xFind(argv) os.Chdir(cwd) } func (gsh*GshContext)Rput(argv[]string){ var local string = "" var remote string = "" if 1 < len(argv) { local = argv[1] remote = local // base name } if 2 < len(argv) { remote = argv[2] } fmt.Printf("--I-- jput from=%v to=%v\n",local,gsh.Trelpath(remote)) } func (gsh*GshContext)Rget(argv[]string){ var remote string = "" var local string = "" if 1 < len(argv) { remote = argv[1] local = remote // base name } if 2 < len(argv) { local = argv[2] } fmt.Printf("--I-- jget from=%v to=%v\n",gsh.Trelpath(remote),local) } // network // -s, -si, -so // bi-directional, source, sync (maybe socket) func (gshCtx*GshContext)sconnect(inTCP bool, argv []string) { gshPA := gshCtx.gshPA if len(argv) < 2 { fmt.Printf("Usage: -s [host]:[port[.udp]]\n") return } remote := argv[1] if remote == ":" { remote = "0.0.0.0:9999" } if inTCP { // TCP dport, err := net.ResolveTCPAddr("tcp",remote); if err != nil { fmt.Printf("Address error: %s (%s)\n",remote,err) return } conn, err := net.DialTCP("tcp",nil,dport) if err != nil { fmt.Printf("Connection error: %s (%s)\n",remote,err) return } file, _ := conn.File(); fd := file.Fd() fmt.Printf("Socket: connected to %s, socket[%d]\n",remote,fd) savfd := gshPA.Files[1] gshPA.Files[1] = fd; gshCtx.gshellv(argv[2:]) gshPA.Files[1] = savfd file.Close() conn.Close() }else{ //dport, err := net.ResolveUDPAddr("udp4",remote); dport, err := net.ResolveUDPAddr("udp",remote); if err != nil { fmt.Printf("Address error: %s (%s)\n",remote,err) return } //conn, err := net.DialUDP("udp4",nil,dport) conn, err := net.DialUDP("udp",nil,dport) if err != nil { fmt.Printf("Connection error: %s (%s)\n",remote,err) return } file, _ := conn.File(); fd := file.Fd() ar := conn.RemoteAddr() //al := conn.LocalAddr() fmt.Printf("Socket: connected to %s [%s], socket[%d]\n", remote,ar.String(),fd) savfd := gshPA.Files[1] gshPA.Files[1] = fd; gshCtx.gshellv(argv[2:]) gshPA.Files[1] = savfd file.Close() conn.Close() } } func (gshCtx*GshContext)saccept(inTCP bool, argv []string) { gshPA := gshCtx.gshPA if len(argv) < 2 { fmt.Printf("Usage: -ac [host]:[port[.udp]]\n") return } local := argv[1] if local == ":" { local = "0.0.0.0:9999" } if inTCP { // TCP port, err := net.ResolveTCPAddr("tcp",local); if err != nil { fmt.Printf("Address error: %s (%s)\n",local,err) return } //fmt.Printf("Listen at %s...\n",local); sconn, err := net.ListenTCP("tcp", port) if err != nil { fmt.Printf("Listen error: %s (%s)\n",local,err) return } //fmt.Printf("Accepting at %s...\n",local); aconn, err := sconn.AcceptTCP() if err != nil { fmt.Printf("Accept error: %s (%s)\n",local,err) return } file, _ := aconn.File() fd := file.Fd() fmt.Printf("Accepted TCP at %s [%d]\n",local,fd) savfd := gshPA.Files[0] gshPA.Files[0] = fd; gshCtx.gshellv(argv[2:]) gshPA.Files[0] = savfd sconn.Close(); aconn.Close(); file.Close(); }else{ //port, err := net.ResolveUDPAddr("udp4",local); port, err := net.ResolveUDPAddr("udp",local); if err != nil { fmt.Printf("Address error: %s (%s)\n",local,err) return } fmt.Printf("Listen UDP at %s...\n",local); //uconn, err := net.ListenUDP("udp4", port) uconn, err := net.ListenUDP("udp", port) if err != nil { fmt.Printf("Listen error: %s (%s)\n",local,err) return } file, _ := uconn.File() fd := file.Fd() ar := uconn.RemoteAddr() remote := "" if ar != nil { remote = ar.String() } if remote == "" { remote = "?" } // not yet received //fmt.Printf("Accepted at %s [%d] <- %s\n",local,fd,"") savfd := gshPA.Files[0] gshPA.Files[0] = fd; savenv := gshPA.Env gshPA.Env = append(savenv, "REMOTE_HOST="+remote) gshCtx.gshellv(argv[2:]) gshPA.Env = savenv gshPA.Files[0] = savfd uconn.Close(); file.Close(); } } // empty line command func (gshCtx*GshContext)xPwd(argv[]string){ // execute context command, pwd + date // context notation, representation scheme, to be resumed at re-login cwd, _ := os.Getwd() switch { case isin("-a",argv): gshCtx.ShowChdirHistory(argv) case isin("-ls",argv): showFileInfo(cwd,argv) default: fmt.Printf("%s\n",cwd) case isin("-v",argv): // obsolete emtpy command t := time.Now() date := t.Format(time.UnixDate) exe, _ := os.Executable() host, _ := os.Hostname() fmt.Printf("{PWD=\"%s\"",cwd) fmt.Printf(" HOST=\"%s\"",host) fmt.Printf(" DATE=\"%s\"",date) fmt.Printf(" TIME=\"%s\"",t.String()) fmt.Printf(" PID=\"%d\"",os.Getpid()) fmt.Printf(" EXE=\"%s\"",exe) fmt.Printf("}\n") } } // History // these should be browsed and edited by HTTP browser // show the time of command with -t and direcotry with -ls // openfile-history, sort by -a -m -c // sort by elapsed time by -t -s // search by "more" like interface // edit history // sort history, and wc or uniq // CPU and other resource consumptions // limit showing range (by time or so) // export / import history func (gshCtx *GshContext)xHistory(argv []string){ atWorkDirX := -1 if 1 < len(argv) && strBegins(argv[1],"@") { atWorkDirX,_ = strconv.Atoi(argv[1][1:]) } //fmt.Printf("--D-- showHistory(%v)\n",argv) for i, v := range gshCtx.CommandHistory { // exclude commands not to be listed by default // internal commands may be suppressed by default if v.CmdLine == "" && !isin("-a",argv) { continue; } if 0 <= atWorkDirX { if v.WorkDirX != atWorkDirX { continue } } if !isin("-n",argv){ // like "fc" fmt.Printf("!%-2d ",i) } if isin("-v",argv){ fmt.Println(v) // should be with it date }else{ if isin("-l",argv) || isin("-l0",argv) { elps := v.EndAt.Sub(v.StartAt); start := v.StartAt.Format(time.Stamp) fmt.Printf("@%d ",v.WorkDirX) fmt.Printf("[%v] %11v/t ",start,elps) } if isin("-l",argv) && !isin("-l0",argv){ fmt.Printf("%v",Rusagef("%t %u\t// %s",argv,v.Rusagev)) } if isin("-at",argv) { // isin("-ls",argv){ dhi := v.WorkDirX // workdir history index fmt.Printf("@%d %s\t",dhi,v.WorkDir) // show the FileInfo of the output command?? } fmt.Printf("%s",v.CmdLine) fmt.Printf("\n") } } } // !n - history index func searchHistory(gshCtx GshContext, gline string) (string, bool, bool){ if gline[0] == '!' { hix, err := strconv.Atoi(gline[1:]) if err != nil { fmt.Printf("--E-- (%s : range)\n",hix) return "", false, true } if hix < 0 || len(gshCtx.CommandHistory) <= hix { fmt.Printf("--E-- (%d : out of range)\n",hix) return "", false, true } return gshCtx.CommandHistory[hix].CmdLine, false, false } // search //for i, v := range gshCtx.CommandHistory { //} return gline, false, false } func (gsh*GshContext)cmdStringInHistory(hix int)(cmd string, ok bool){ if 0 <= hix && hix < len(gsh.CommandHistory) { return gsh.CommandHistory[hix].CmdLine,true } return "",false } // temporary adding to PATH environment // cd name -lib for LD_LIBRARY_PATH // chdir with directory history (date + full-path) // -s for sort option (by visit date or so) func (gsh*GshContext)ShowChdirHistory1(i int,v GChdirHistory, argv []string){ fmt.Printf("!%-2d ",v.CmdIndex) // the first command at this WorkDir fmt.Printf("@%d ",i) fmt.Printf("[%v] ",v.MovedAt.Format(time.Stamp)) showFileInfo(v.Dir,argv) } func (gsh*GshContext)ShowChdirHistory(argv []string){ for i, v := range gsh.ChdirHistory { gsh.ShowChdirHistory1(i,v,argv) } } func skipOpts(argv[]string)(int){ for i,v := range argv { if strBegins(v,"-") { }else{ return i } } return -1 } func (gshCtx*GshContext)xChdir(argv []string){ cdhist := gshCtx.ChdirHistory if isin("?",argv ) || isin("-t",argv) || isin("-a",argv) { gshCtx.ShowChdirHistory(argv) return } pwd, _ := os.Getwd() dir := "" if len(argv) <= 1 { dir = toFullpath("~") }else{ i := skipOpts(argv[1:]) if i < 0 { dir = toFullpath("~") }else{ dir = argv[1+i] } } if strBegins(dir,"@") { if dir == "@0" { // obsolete dir = gshCtx.StartDir }else if dir == "@!" { index := len(cdhist) - 1 if 0 < index { index -= 1 } dir = cdhist[index].Dir }else{ index, err := strconv.Atoi(dir[1:]) if err != nil { fmt.Printf("--E-- xChdir(%v)\n",err) dir = "?" }else if len(gshCtx.ChdirHistory) <= index { fmt.Printf("--E-- xChdir(history range error)\n") dir = "?" }else{ dir = cdhist[index].Dir } } } if dir != "?" { err := os.Chdir(dir) if err != nil { fmt.Printf("--E-- xChdir(%s)(%v)\n",argv[1],err) }else{ cwd, _ := os.Getwd() if cwd != pwd { hist1 := GChdirHistory { } hist1.Dir = cwd hist1.MovedAt = time.Now() hist1.CmdIndex = len(gshCtx.CommandHistory)+1 gshCtx.ChdirHistory = append(cdhist,hist1) if !isin("-s",argv){ //cwd, _ := os.Getwd() //fmt.Printf("%s\n",cwd) ix := len(gshCtx.ChdirHistory)-1 gshCtx.ShowChdirHistory1(ix,hist1,argv) } } } } if isin("-ls",argv){ cwd, _ := os.Getwd() showFileInfo(cwd,argv); } } func TimeValSub(tv1 *syscall.Timeval, tv2 *syscall.Timeval){ *tv1 = syscall.NsecToTimeval(tv1.Nano() - tv2.Nano()) } func RusageSubv(ru1, ru2 [2]syscall.Rusage)([2]syscall.Rusage){ TimeValSub(&ru1[0].Utime,&ru2[0].Utime) TimeValSub(&ru1[0].Stime,&ru2[0].Stime) TimeValSub(&ru1[1].Utime,&ru2[1].Utime) TimeValSub(&ru1[1].Stime,&ru2[1].Stime) return ru1 } func TimeValAdd(tv1 syscall.Timeval, tv2 syscall.Timeval)(syscall.Timeval){ tvs := syscall.NsecToTimeval(tv1.Nano() + tv2.Nano()) return tvs } /* func RusageAddv(ru1, ru2 [2]syscall.Rusage)([2]syscall.Rusage){ TimeValAdd(ru1[0].Utime,ru2[0].Utime) TimeValAdd(ru1[0].Stime,ru2[0].Stime) TimeValAdd(ru1[1].Utime,ru2[1].Utime) TimeValAdd(ru1[1].Stime,ru2[1].Stime) return ru1 } */ // Resource Usage func sRusagef(fmtspec string, argv []string, ru [2]syscall.Rusage)(string){ // ru[0] self , ru[1] children ut := TimeValAdd(ru[0].Utime,ru[1].Utime) st := TimeValAdd(ru[0].Stime,ru[1].Stime) uu := (ut.Sec*1000000 + int64(ut.Usec)) * 1000 su := (st.Sec*1000000 + int64(st.Usec)) * 1000 tu := uu + su ret := fmt.Sprintf("%v/sum",abbtime(tu)) ret += fmt.Sprintf(", %v/usr",abbtime(uu)) ret += fmt.Sprintf(", %v/sys",abbtime(su)) return ret } func Rusagef(fmtspec string, argv []string, ru [2]syscall.Rusage)(string){ ut := TimeValAdd(ru[0].Utime,ru[1].Utime) st := TimeValAdd(ru[0].Stime,ru[1].Stime) fmt.Printf("%d.%06ds/u ",ut.Sec,ut.Usec) //ru[1].Utime.Sec,ru[1].Utime.Usec) fmt.Printf("%d.%06ds/s ",st.Sec,st.Usec) //ru[1].Stime.Sec,ru[1].Stime.Usec) return "" } func Getrusagev()([2]syscall.Rusage){ var ruv = [2]syscall.Rusage{} syscall.Getrusage(syscall.RUSAGE_SELF,&ruv[0]) syscall.Getrusage(syscall.RUSAGE_CHILDREN,&ruv[1]) return ruv } func showRusage(what string,argv []string, ru *syscall.Rusage){ fmt.Printf("%s: ",what); fmt.Printf("Usr=%d.%06ds",ru.Utime.Sec,ru.Utime.Usec) fmt.Printf(" Sys=%d.%06ds",ru.Stime.Sec,ru.Stime.Usec) fmt.Printf(" Rss=%vB",ru.Maxrss) if isin("-l",argv) { fmt.Printf(" MinFlt=%v",ru.Minflt) fmt.Printf(" MajFlt=%v",ru.Majflt) fmt.Printf(" IxRSS=%vB",ru.Ixrss) fmt.Printf(" IdRSS=%vB",ru.Idrss) fmt.Printf(" Nswap=%vB",ru.Nswap) fmt.Printf(" Read=%v",ru.Inblock) fmt.Printf(" Write=%v",ru.Oublock) } fmt.Printf(" Snd=%v",ru.Msgsnd) fmt.Printf(" Rcv=%v",ru.Msgrcv) //if isin("-l",argv) { fmt.Printf(" Sig=%v",ru.Nsignals) //} fmt.Printf("\n"); } func (gshCtx *GshContext)xTime(argv[]string)(bool){ if 2 <= len(argv){ gshCtx.LastRusage = syscall.Rusage{} rusagev1 := Getrusagev() fin := gshCtx.gshellv(argv[1:]) rusagev2 := Getrusagev() showRusage(argv[1],argv,&gshCtx.LastRusage) rusagev := RusageSubv(rusagev2,rusagev1) showRusage("self",argv,&rusagev[0]) showRusage("chld",argv,&rusagev[1]) return fin }else{ rusage:= syscall.Rusage {} syscall.Getrusage(syscall.RUSAGE_SELF,&rusage) showRusage("self",argv, &rusage) syscall.Getrusage(syscall.RUSAGE_CHILDREN,&rusage) showRusage("chld",argv, &rusage) return false } } func (gshCtx *GshContext)xJobs(argv[]string){ fmt.Printf("%d Jobs\n",len(gshCtx.BackGroundJobs)) for ji, pid := range gshCtx.BackGroundJobs { //wstat := syscall.WaitStatus {0} rusage := syscall.Rusage {} //wpid, err := syscall.Wait4(pid,&wstat,syscall.WNOHANG,&rusage); wpid, err := syscall.Wait4(pid,nil,syscall.WNOHANG,&rusage); if err != nil { fmt.Printf("--E-- %%%d [%d] (%v)\n",ji,pid,err) }else{ fmt.Printf("%%%d[%d](%d)\n",ji,pid,wpid) showRusage("chld",argv,&rusage) } } } func (gsh*GshContext)inBackground(argv[]string)(bool){ if gsh.CmdTrace { fmt.Printf("--I-- inBackground(%v)\n",argv) } gsh.BackGround = true // set background option xfin := false xfin = gsh.gshellv(argv) gsh.BackGround = false return xfin } // -o file without command means just opening it and refer by #N // should be listed by "files" comnmand func (gshCtx*GshContext)xOpen(argv[]string){ var pv = []int{-1,-1} err := syscall.Pipe(pv) fmt.Printf("--I-- pipe()=[#%d,#%d](%v)\n",pv[0],pv[1],err) } func (gshCtx*GshContext)fromPipe(argv[]string){ } func (gshCtx*GshContext)xClose(argv[]string){ } // redirect func (gshCtx*GshContext)redirect(argv[]string)(bool){ if len(argv) < 2 { return false } cmd := argv[0] fname := argv[1] var file *os.File = nil fdix := 0 mode := os.O_RDONLY switch { case cmd == "-i" || cmd == "<": fdix = 0 mode = os.O_RDONLY case cmd == "-o" || cmd == ">": fdix = 1 mode = os.O_RDWR | os.O_CREATE case cmd == "-a" || cmd == ">>": fdix = 1 mode = os.O_RDWR | os.O_CREATE | os.O_APPEND } if fname[0] == '#' { fd, err := strconv.Atoi(fname[1:]) if err != nil { fmt.Printf("--E-- (%v)\n",err) return false } file = os.NewFile(uintptr(fd),"MaybePipe") }else{ xfile, err := os.OpenFile(argv[1], mode, 0600) if err != nil { fmt.Printf("--E-- (%s)\n",err) return false } file = xfile } gshPA := gshCtx.gshPA savfd := gshPA.Files[fdix] gshPA.Files[fdix] = file.Fd() fmt.Printf("--I-- Opened [%d] %s\n",file.Fd(),argv[1]) gshCtx.gshellv(argv[2:]) gshPA.Files[fdix] = savfd return false } //fmt.Fprintf(res, "GShell Status: %q", html.EscapeString(req.URL.Path)) func httpHandler(res http.ResponseWriter, req *http.Request){ path := req.URL.Path fmt.Printf("--I-- Got HTTP Request(%s)\n",path) { gshCtxBuf, _ := setupGshContext() gshCtx := &gshCtxBuf fmt.Printf("--I-- %s\n",path[1:]) gshCtx.tgshelll(path[1:]) } fmt.Fprintf(res, "Hello(^-^)/\n%s\n",path) } func (gshCtx *GshContext) httpServer(argv []string){ http.HandleFunc("/", httpHandler) accport := "localhost:9999" fmt.Printf("--I-- HTTP Server Start at [%s]\n",accport) http.ListenAndServe(accport,nil) } func (gshCtx *GshContext)xGo(argv[]string){ go gshCtx.gshellv(argv[1:]); } func (gshCtx *GshContext) xPs(argv[]string)(){ } // Plugin // plugin [-ls [names]] to list plugins // Reference: plugin source code func (gshCtx *GshContext) whichPlugin(name string,argv[]string)(pi *PluginInfo){ pi = nil for _,p := range gshCtx.PluginFuncs { if p.Name == name && pi == nil { pi = &p } if !isin("-s",argv){ //fmt.Printf("%v %v ",i,p) if isin("-ls",argv){ showFileInfo(p.Path,argv) }else{ fmt.Printf("%s\n",p.Name) } } } return pi } func (gshCtx *GshContext) xPlugin(argv[]string) (error) { if len(argv) == 0 || argv[0] == "-ls" { gshCtx.whichPlugin("",argv) return nil } name := argv[0] Pin := gshCtx.whichPlugin(name,[]string{"-s"}) if Pin != nil { os.Args = argv // should be recovered? Pin.Addr.(func())() return nil } sofile := toFullpath(argv[0] + ".so") // or find it by which($PATH) p, err := plugin.Open(sofile) if err != nil { fmt.Printf("--E-- plugin.Open(%s)(%v)\n",sofile,err) return err } fname := "Main" f, err := p.Lookup(fname) if( err != nil ){ fmt.Printf("--E-- plugin.Lookup(%s)(%v)\n",fname,err) return err } pin := PluginInfo {p,f,name,sofile} gshCtx.PluginFuncs = append(gshCtx.PluginFuncs,pin) fmt.Printf("--I-- added (%d)\n",len(gshCtx.PluginFuncs)) //fmt.Printf("--I-- first call(%s:%s)%v\n",sofile,fname,argv) os.Args = argv f.(func())() return err } func (gshCtx*GshContext)Args(argv[]string){ for i,v := range os.Args { fmt.Printf("[%v] %v\n",i,v) } } func (gshCtx *GshContext) showVersion(argv[]string){ if isin("-l",argv) { fmt.Printf("%v/%v (%v)",NAME,VERSION,DATE); }else{ fmt.Printf("%v",VERSION); } if isin("-a",argv) { fmt.Printf(" %s",AUTHOR) } if !isin("-n",argv) { fmt.Printf("\n") } } // Scanf // string decomposer // scanf [format] [input] func scanv(sstr string)(strv[]string){ strv = strings.Split(sstr," ") return strv } func scanUntil(src,end string)(rstr string,leng int){ idx := strings.Index(src,end) if 0 <= idx { rstr = src[0:idx] return rstr,idx+len(end) } return src,0 } // -bn -- display base-name part only // can be in some %fmt, for sed rewriting func (gsh*GshContext)printVal(fmts string, vstr string, optv[]string){ //vint,err := strconv.Atoi(vstr) var ival int64 = 0 n := 0 err := error(nil) if strBegins(vstr,"_") { vx,_ := strconv.Atoi(vstr[1:]) if vx < len(gsh.iValues) { vstr = gsh.iValues[vx] }else{ } } // should use Eval() if strBegins(vstr,"0x") { n,err = fmt.Sscanf(vstr[2:],"%x",&ival) }else{ n,err = fmt.Sscanf(vstr,"%d",&ival) //fmt.Printf("--D-- n=%d err=(%v) {%s}=%v\n",n,err,vstr, ival) } if n == 1 && err == nil { //fmt.Printf("--D-- formatn(%v) ival(%v)\n",fmts,ival) fmt.Printf("%"+fmts,ival) }else{ if isin("-bn",optv){ fmt.Printf("%"+fmts,filepath.Base(vstr)) }else{ fmt.Printf("%"+fmts,vstr) } } } func (gsh*GshContext)printfv(fmts,div string,argv[]string,optv[]string,list[]string){ //fmt.Printf("{%d}",len(list)) //curfmt := "v" outlen := 0 curfmt := gsh.iFormat if 0 < len(fmts) { for xi := 0; xi < len(fmts); xi++ { fch := fmts[xi] if fch == '%' { if xi+1 < len(fmts) { curfmt = string(fmts[xi+1]) gsh.iFormat = curfmt xi += 1 if xi+1 < len(fmts) && fmts[xi+1] == '(' { vals,leng := scanUntil(fmts[xi+2:],")") //fmt.Printf("--D-- show fmt(%v) val(%v) next(%v)\n",curfmt,vals,leng) gsh.printVal(curfmt,vals,optv) xi += 2+leng-1 outlen += 1 } continue } } if fch == '_' { hi,leng := scanInt(fmts[xi+1:]) if 0 < leng { if hi < len(gsh.iValues) { gsh.printVal(curfmt,gsh.iValues[hi],optv) outlen += 1 // should be the real length }else{ fmt.Printf("((out-range))") } xi += leng continue; } } fmt.Printf("%c",fch) outlen += 1 } }else{ //fmt.Printf("--D-- print {%s}\n") for i,v := range list { if 0 < i { fmt.Printf(div) } gsh.printVal(curfmt,v,optv) outlen += 1 } } if 0 < outlen { fmt.Printf("\n") } } func (gsh*GshContext)Scanv(argv[]string){ //fmt.Printf("--D-- Scanv(%v)\n",argv) if len(argv) == 1 { return } argv = argv[1:] fmts := "" if strBegins(argv[0],"-F") { fmts = argv[0] gsh.iDelimiter = fmts argv = argv[1:] } input := strings.Join(argv," ") if fmts == "" { // simple decomposition v := scanv(input) gsh.iValues = v //fmt.Printf("%v\n",strings.Join(v,",")) }else{ v := make([]string,8) n,err := fmt.Sscanf(input,fmts,&v[0],&v[1],&v[2],&v[3]) fmt.Printf("--D-- Scanf ->(%v) n=%d err=(%v)\n",v,n,err) gsh.iValues = v } } func (gsh*GshContext)Printv(argv[]string){ if false { //@@U fmt.Printf("%v\n",strings.Join(argv[1:]," ")) return } //fmt.Printf("--D-- Printv(%v)\n",argv) //fmt.Printf("%v\n",strings.Join(gsh.iValues,",")) div := gsh.iDelimiter fmts := "" argv = argv[1:] if 0 < len(argv) { if strBegins(argv[0],"-F") { div = argv[0][2:] argv = argv[1:] } } optv := []string{} for _,v := range argv { if strBegins(v,"-"){ optv = append(optv,v) argv = argv[1:] }else{ break; } } if 0 < len(argv) { fmts = strings.Join(argv," ") } gsh.printfv(fmts,div,argv,optv,gsh.iValues) } func (gsh*GshContext)Basename(argv[]string){ for i,v := range gsh.iValues { gsh.iValues[i] = filepath.Base(v) } } func (gsh*GshContext)Sortv(argv[]string){ sv := gsh.iValues sort.Slice(sv , func(i,j int) bool { return sv[i] < sv[j] }) } func (gsh*GshContext)Shiftv(argv[]string){ vi := len(gsh.iValues) if 0 < vi { if isin("-r",argv) { top := gsh.iValues[0] gsh.iValues = append(gsh.iValues[1:],top) }else{ gsh.iValues = gsh.iValues[1:] } } } func (gsh*GshContext)Enq(argv[]string){ } func (gsh*GshContext)Deq(argv[]string){ } func (gsh*GshContext)Push(argv[]string){ gsh.iValStack = append(gsh.iValStack,argv[1:]) fmt.Printf("depth=%d\n",len(gsh.iValStack)) } func (gsh*GshContext)Dump(argv[]string){ for i,v := range gsh.iValStack { fmt.Printf("%d %v\n",i,v) } } func (gsh*GshContext)Pop(argv[]string){ depth := len(gsh.iValStack) if 0 < depth { v := gsh.iValStack[depth-1] if isin("-cat",argv){ gsh.iValues = append(gsh.iValues,v...) }else{ gsh.iValues = v } gsh.iValStack = gsh.iValStack[0:depth-1] fmt.Printf("depth=%d %s\n",len(gsh.iValStack),gsh.iValues) }else{ fmt.Printf("depth=%d\n",depth) } } // Command Interpreter func (gshCtx*GshContext)gshellv(argv []string) (fin bool) { fin = false if gshCtx.CmdTrace { fmt.Fprintf(os.Stderr,"--I-- gshellv((%d))\n",len(argv)) } if len(argv) <= 0 { return false } xargv := []string{} for ai := 0; ai < len(argv); ai++ { xargv = append(xargv,strsubst(gshCtx,argv[ai],false)) } argv = xargv if false { for ai := 0; ai < len(argv); ai++ { fmt.Printf("[%d] %s [%d]%T\n", ai,argv[ai],len(argv[ai]),argv[ai]) } } cmd := argv[0] if gshCtx.CmdTrace { fmt.Fprintf(os.Stderr,"--I-- gshellv(%d)%v\n",len(argv),argv) } switch { // https://tour.golang.org/flowcontrol/11 case cmd == "": gshCtx.xPwd([]string{}); // emtpy command case cmd == "-x": gshCtx.CmdTrace = ! gshCtx.CmdTrace case cmd == "-xt": gshCtx.CmdTime = ! gshCtx.CmdTime case cmd == "-ot": gshCtx.sconnect(true, argv) case cmd == "-ou": gshCtx.sconnect(false, argv) case cmd == "-it": gshCtx.saccept(true , argv) case cmd == "-iu": gshCtx.saccept(false, argv) case cmd == "-i" || cmd == "<" || cmd == "-o" || cmd == ">" || cmd == "-a" || cmd == ">>" || cmd == "-s" || cmd == "><": gshCtx.redirect(argv) case cmd == "|": gshCtx.fromPipe(argv) case cmd == "args": gshCtx.Args(argv) case cmd == "bg" || cmd == "-bg": rfin := gshCtx.inBackground(argv[1:]) return rfin case cmd == "-bn": gshCtx.Basename(argv) case cmd == "call": _,_ = gshCtx.excommand(false,argv[1:]) case cmd == "cd" || cmd == "chdir": gshCtx.xChdir(argv); case cmd == "-cksum": gshCtx.xFind(argv) case cmd == "-sum": gshCtx.xFind(argv) case cmd == "close": gshCtx.xClose(argv) case cmd == "gcp": gshCtx.FileCopy(argv) case cmd == "dec" || cmd == "decode": gshCtx.Dec(argv) case cmd == "#define": case cmd == "dic": xDic(argv) case cmd == "dump": gshCtx.Dump(argv) case cmd == "echo": echo(argv,true) case cmd == "enc" || cmd == "encode": gshCtx.Enc(argv) case cmd == "env": env(argv) case cmd == "eval": xEval(argv[1:],true) case cmd == "ev" || cmd == "events": dumpEvents(0) case cmd == "exec": _,_ = gshCtx.excommand(true,argv[1:]) // should not return here case cmd == "exit" || cmd == "quit": // write Result code EXIT to 3> return true case cmd == "fdls": // dump the attributes of fds (of other process) case cmd == "-find" || cmd == "fin" || cmd == "ufind" || cmd == "uf": gshCtx.xFind(argv[1:]) case cmd == "fu": gshCtx.xFind(argv[1:]) case cmd == "fork": // mainly for a server case cmd == "-gen": gshCtx.gen(argv) case cmd == "-go": gshCtx.xGo(argv) case cmd == "-grep": gshCtx.xFind(argv) case cmd == "gdeq": gshCtx.Deq(argv) case cmd == "genq": gshCtx.Enq(argv) case cmd == "gpop": gshCtx.Pop(argv) case cmd == "gpush": gshCtx.Push(argv) case cmd == "history" || cmd == "hi": // hi should be alias gshCtx.xHistory(argv) case cmd == "jobs": gshCtx.xJobs(argv) case cmd == "lnsp": gshCtx.SplitLine(argv) case cmd == "-ls": gshCtx.xFind(argv) case cmd == "nop": // do nothing case cmd == "pipe": gshCtx.xOpen(argv) case cmd == "plug" || cmd == "plugin" || cmd == "pin": gshCtx.xPlugin(argv[1:]) case cmd == "print" || cmd == "-pr": // output internal slice // also sprintf should be gshCtx.Printv(argv) case cmd == "ps": gshCtx.xPs(argv) case cmd == "pstitle": // to be gsh.title case cmd == "rexecd" || cmd == "rexd": gshCtx.RexecServer(argv) case cmd == "rexec" || cmd == "rex": gshCtx.RexecClient(argv) case cmd == "repeat" || cmd == "rep": // repeat cond command gshCtx.repeat(argv) case cmd == "replay": gshCtx.xReplay(argv) case cmd == "scan": // scan input (or so in fscanf) to internal slice (like Files or map) gshCtx.Scanv(argv) case cmd == "set": // set name ... case cmd == "serv": gshCtx.httpServer(argv) case cmd == "shift": gshCtx.Shiftv(argv) case cmd == "sleep": gshCtx.sleep(argv) case cmd == "-sort": gshCtx.Sortv(argv) case cmd == "j" || cmd == "join": gshCtx.Rjoin(argv) case cmd == "a" || cmd == "alpa": gshCtx.Rexec(argv) case cmd == "jcd" || cmd == "jchdir": gshCtx.Rchdir(argv) case cmd == "jget": gshCtx.Rget(argv) case cmd == "jls": gshCtx.Rls(argv) case cmd == "jput": gshCtx.Rput(argv) case cmd == "jpwd": gshCtx.Rpwd(argv) case cmd == "time": fin = gshCtx.xTime(argv) case cmd == "ungets": if 1 < len(argv) { ungets(argv[1]+"\n") }else{ } case cmd == "pwd": gshCtx.xPwd(argv); case cmd == "ver" || cmd == "-ver" || cmd == "version": gshCtx.showVersion(argv) case cmd == "where": // data file or so? case cmd == "which": which("PATH",argv); default: if gshCtx.whichPlugin(cmd,[]string{"-s"}) != nil { gshCtx.xPlugin(argv) }else{ notfound,_ := gshCtx.excommand(false,argv) if notfound { fmt.Printf("--E-- command not found (%v)\n",cmd) } } } return fin } func (gsh*GshContext)gshelll(gline string) (rfin bool) { argv := strings.Split(string(gline)," ") fin := gsh.gshellv(argv) return fin } func (gsh*GshContext)tgshelll(gline string)(xfin bool){ start := time.Now() fin := gsh.gshelll(gline) end := time.Now() elps := end.Sub(start); if gsh.CmdTime { fmt.Printf("--T-- " + time.Now().Format(time.Stamp) + "(%d.%09ds)\n", elps/1000000000,elps%1000000000) } return fin } func Ttyid() (int) { fi, err := os.Stdin.Stat() if err != nil { return 0; } //fmt.Printf("Stdin: %v Dev=%d\n", // fi.Mode(),fi.Mode()&os.ModeDevice) if (fi.Mode() & os.ModeDevice) != 0 { stat := syscall.Stat_t{}; err := syscall.Fstat(0,&stat) if err != nil { //fmt.Printf("--I-- Stdin: (%v)\n",err) }else{ //fmt.Printf("--I-- Stdin: rdev=%d %d\n", // stat.Rdev&0xFF,stat.Rdev); //fmt.Printf("--I-- Stdin: tty%d\n",stat.Rdev&0xFF); return int(stat.Rdev & 0xFF) } } return 0 } func (gshCtx *GshContext) ttyfile() string { //fmt.Printf("--I-- GSH_HOME=%s\n",gshCtx.GshHomeDir) ttyfile := gshCtx.GshHomeDir + "/" + "gsh-tty" + fmt.Sprintf("%02d",gshCtx.TerminalId) //strconv.Itoa(gshCtx.TerminalId) //fmt.Printf("--I-- ttyfile=%s\n",ttyfile) return ttyfile } func (gshCtx *GshContext) ttyline()(*os.File){ file, err := os.OpenFile(gshCtx.ttyfile(),os.O_RDWR|os.O_CREATE|os.O_TRUNC,0600) if err != nil { fmt.Printf("--F-- cannot open %s (%s)\n",gshCtx.ttyfile(),err) return file; } return file } func (gshCtx *GshContext)getline(hix int, skipping bool, prevline string) (string) { if( skipping ){ reader := bufio.NewReaderSize(os.Stdin,LINESIZE) line, _, _ := reader.ReadLine() return string(line) }else if true { return xgetline(hix,prevline,gshCtx) } /* else if( with_exgetline && gshCtx.GetLine != "" ){ //var xhix int64 = int64(hix); // cast newenv := os.Environ() newenv = append(newenv, "GSH_LINENO="+strconv.FormatInt(int64(hix),10) ) tty := gshCtx.ttyline() tty.WriteString(prevline) Pa := os.ProcAttr { "", // start dir newenv, //os.Environ(), []*os.File{os.Stdin,os.Stdout,os.Stderr,tty}, nil, } //fmt.Printf("--I-- getline=%s // %s\n",gsh_getlinev[0],gshCtx.GetLine) proc, err := os.StartProcess(gsh_getlinev[0],[]string{"getline","getline"},&Pa) if err != nil { fmt.Printf("--F-- getline process error (%v)\n",err) // for ; ; { } return "exit (getline program failed)" } //stat, err := proc.Wait() proc.Wait() buff := make([]byte,LINESIZE) count, err := tty.Read(buff) //_, err = tty.Read(buff) //fmt.Printf("--D-- getline (%d)\n",count) if err != nil { if ! (count == 0) { // && err.String() == "EOF" ) { fmt.Printf("--E-- getline error (%s)\n",err) } }else{ //fmt.Printf("--I-- getline OK \"%s\"\n",buff) } tty.Close() gline := string(buff[0:count]) return gline }else */ { // if isatty { fmt.Printf("!%d",hix) fmt.Print(PROMPT) // } reader := bufio.NewReaderSize(os.Stdin,LINESIZE) line, _, _ := reader.ReadLine() return string(line) } } //== begin ======================================================= getline /* * getline.c * 2020-0819 extracted from dog.c * getline.go * 2020-0822 ported to Go */ /* package main // getline main import ( "fmt" // fmt "strings" // strings "os" // os "syscall" // syscall //"bytes" // os //"os/exec" // os ) */ // C language compatibility functions var errno = 0 var stdin *os.File = os.Stdin var stdout *os.File = os.Stdout var stderr *os.File = os.Stderr var EOF = -1 var NULL = 0 type FILE os.File type StrBuff []byte var NULL_FP *os.File = nil var NULLSP = 0 //var LINESIZE = 1024 func system(cmdstr string)(int){ PA := syscall.ProcAttr { "", // the starting directory os.Environ(), []uintptr{os.Stdin.Fd(),os.Stdout.Fd(),os.Stderr.Fd()}, nil, } argv := strings.Split(cmdstr," ") pid,err := syscall.ForkExec(argv[0],argv,&PA) if( err != nil ){ fmt.Printf("--E-- syscall(%v) err(%v)\n",cmdstr,err) } syscall.Wait4(pid,nil,0,nil) /* argv := strings.Split(cmdstr," ") fmt.Fprintf(os.Stderr,"--I-- system(%v)\n",argv) //cmd := exec.Command(argv[0:]...) cmd := exec.Command(argv[0],argv[1],argv[2]) cmd.Stdin = strings.NewReader("output of system") var out bytes.Buffer cmd.Stdout = &out var serr bytes.Buffer cmd.Stderr = &serr err := cmd.Run() if err != nil { fmt.Fprintf(os.Stderr,"--E-- system(%v)err(%v)\n",argv,err) fmt.Printf("ERR:%s\n",serr.String()) }else{ fmt.Printf("%s",out.String()) } */ return 0 } func atoi(str string)(ret int){ ret,err := fmt.Sscanf(str,"%d",ret) if err == nil { return ret }else{ // should set errno return 0 } } func getenv(name string)(string){ val,got := os.LookupEnv(name) if got { return val }else{ return "?" } } func strcpy(dst StrBuff, src string){ var i int srcb := []byte(src) for i = 0; i < len(src) && srcb[i] != 0; i++ { dst[i] = srcb[i] } dst[i] = 0 } func xstrcpy(dst StrBuff, src StrBuff){ dst = src } func strcat(dst StrBuff, src StrBuff){ dst = append(dst,src...) } func strdup(str StrBuff)(string){ return string(str[0:strlen(str)]) } func sstrlen(str string)(int){ return len(str) } func strlen(str StrBuff)(int){ var i int for i = 0; i < len(str) && str[i] != 0; i++ { } return i } func sizeof(data StrBuff)(int){ return len(data) } func isatty(fd int)(ret int){ return 1 } func fopen(file string,mode string)(fp*os.File){ if mode == "r" { fp,err := os.Open(file) if( err != nil ){ fmt.Printf("--E-- fopen(%s,%s)=(%v)\n",file,mode,err) return NULL_FP; } return fp; }else{ fp,err := os.OpenFile(file,os.O_RDWR|os.O_CREATE|os.O_TRUNC,0600) if( err != nil ){ return NULL_FP; } return fp; } } func fclose(fp*os.File){ fp.Close() } func fflush(fp *os.File)(int){ return 0 } func fgetc(fp*os.File)(int){ var buf [1]byte _,err := fp.Read(buf[0:1]) if( err != nil ){ return EOF; }else{ return int(buf[0]) } } func sfgets(str*string, size int, fp*os.File)(int){ buf := make(StrBuff,size) var ch int var i int for i = 0; i < len(buf)-1; i++ { ch = fgetc(fp) //fprintf(stderr,"--fgets %d/%d %X\n",i,len(buf),ch) if( ch == EOF ){ break; } buf[i] = byte(ch); if( ch == '\n' ){ break; } } buf[i] = 0 //fprintf(stderr,"--fgets %d/%d (%s)\n",i,len(buf),buf[0:i]) return i } func fgets(buf StrBuff, size int, fp*os.File)(int){ var ch int var i int for i = 0; i < len(buf)-1; i++ { ch = fgetc(fp) //fprintf(stderr,"--fgets %d/%d %X\n",i,len(buf),ch) if( ch == EOF ){ break; } buf[i] = byte(ch); if( ch == '\n' ){ break; } } buf[i] = 0 //fprintf(stderr,"--fgets %d/%d (%s)\n",i,len(buf),buf[0:i]) return i } func fputc(ch int , fp*os.File)(int){ var buf [1]byte buf[0] = byte(ch) fp.Write(buf[0:1]) return 0 } func fputs(buf StrBuff, fp*os.File)(int){ fp.Write(buf) return 0 } func xfputss(str string, fp*os.File)(int){ return fputs([]byte(str),fp) } func sscanf(str StrBuff,fmts string, params ...interface{})(int){ fmt.Sscanf(string(str[0:strlen(str)]),fmts,params...) return 0 } func fprintf(fp*os.File,fmts string, params ...interface{})(int){ fmt.Fprintf(fp,fmts,params...) return 0 } // Command Line IME //----------------------------------------------------------------------- MyIME var MyIMEVER = "MyIME/0.0.2"; type RomKana struct { dic string // dictionaly ID pat string // input pattern out string // output pattern hit int64 // count of hit and used } var dicents = 0 var romkana [1024]RomKana var Romkan []RomKana func isinDic(str string)(int){ for i,v := range Romkan { if v.pat == str { return i } } return -1 } const ( DIC_COM_LOAD = "im" DIC_COM_DUMP = "s" DIC_COM_LIST = "ls" DIC_COM_ENA = "en" DIC_COM_DIS = "di" ) func helpDic(argv []string){ out := stderr cmd := "" if 0 < len(argv) { cmd = argv[0] } fprintf(out,"--- %v Usage\n",cmd) fprintf(out,"... Commands\n") fprintf(out,"... %v %-3v [dicName] [dicURL ] -- Import dictionary\n",cmd,DIC_COM_LOAD) fprintf(out,"... %v %-3v [pattern] -- Search in dictionary\n",cmd,DIC_COM_DUMP) fprintf(out,"... %v %-3v [dicName] -- List dictionaries\n",cmd,DIC_COM_LIST) fprintf(out,"... %v %-3v [dicName] -- Disable dictionaries\n",cmd,DIC_COM_DIS) fprintf(out,"... %v %-3v [dicName] -- Enable dictionaries\n",cmd,DIC_COM_ENA) fprintf(out,"... Keys ... %v\n","ESC can be used for '\\'") fprintf(out,"... \\c -- Reverse the case of the last character\n",) fprintf(out,"... \\i -- Replace input with translated text\n",) fprintf(out,"... \\j -- On/Off translation mode\n",) fprintf(out,"... \\l -- Force Lower Case\n",) fprintf(out,"... \\u -- Force Upper Case (software CapsLock)\n",) fprintf(out,"... \\v -- Show translation actions\n",) fprintf(out,"... \\x -- Replace the last input character with it Hexa-Decimal\n",) } func xDic(argv[]string){ if len(argv) <= 1 { helpDic(argv) return } argv = argv[1:] var debug = false var info = false var dump = false cmd := argv[0] argv = argv[1:] opt := "" arg := "" if 0 < len(argv) { arg1 := argv[0] if arg1[0] == '-' { switch arg1 { default: fmt.Printf("--Ed-- Unknown option(%v)\n",arg1) return case "-v": debug = true case "-d": debug = true } opt = arg1 argv = argv[1:] } } dicName := "" dicURL := "" if 0 < len(argv) { arg = argv[0] argv = argv[1:] } if false { fprintf(stderr,"--Dd-- com(%v) opt(%v) arg(%v)\n",cmd,opt,arg) } if cmd == DIC_COM_LOAD { switch arg { default: dicName = "WorldDic" dicURL = WorldDic if info { fprintf(stderr,"--Id-- default dictionary \"%v\"\n",dicName); } case "jkl": dicName = "JKLJaDic" dicURL = JA_JKLDic } if debug { fprintf(stderr,"--Id-- %v URL=%v\n\n",dicName,dicURL); } dicv := strings.Split(dicURL,",") if debug { fprintf(stderr,"--Id-- %v encoded data...\n",dicName) fprintf(stderr,"Type: %v\n",dicv[0]) fprintf(stderr,"Body: %v\n",dicv[1]) fprintf(stderr,"\n") } body,_ := base64.StdEncoding.DecodeString(dicv[1]) if debug { fprintf(stderr,"--Id-- WorldDic %v text...\n",dicName) fprintf(stderr,"%v\n",string(body)) } entv := strings.Split(string(body),"\n"); if info { fprintf(stderr,"--Id-- %v scan...\n",dicName); } var added int = 0 var dup int = 0 for i,v := range entv { var pat string var out string fmt.Sscanf(v,"%s %s",&pat,&out) if len(pat) <= 0 { }else{ if 0 <= isinDic(pat) { dup += 1 continue } romkana[dicents] = RomKana{dicName,pat,out,0} dicents += 1 added += 1 Romkan = append(Romkan,RomKana{dicName,pat,out,0}) if debug { fmt.Printf("[%3v]:[%2v]%-8v [%2v]%v\n", i,len(pat),pat,len(out),out) } } } if info { fprintf(stderr,"--Id-- %v scan... %v added, %v dup. / %v total\n", dicName,added,dup,len(Romkan)); } // should sort by pattern length for conclete match, for performance if debug { arg = "" // search pattern dump = true } } if cmd == DIC_COM_DUMP || dump { fprintf(stderr,"--Id-- %v dump... %v entries:\n",dicName,len(Romkan)); var match = 0 for i := 0; i < len(Romkan); i++ { dic := Romkan[i].dic pat := Romkan[i].pat out := Romkan[i].out if arg == "" || 0 <= strings.Index(pat,arg)||0 <= strings.Index(out,arg) { fmt.Printf("\\\\%v\t%v [%2v]%-8v [%2v]%v\n", i,dic,len(pat),pat,len(out),out) match += 1 } } fprintf(stderr,"--Id-- %v matched %v / %v entries:\n",arg,match,len(Romkan)); } } func loadDefaultDic(dic int){ if( 0 < len(Romkan) ){ return } //fprintf(stderr,"\r\n") xDic([]string{"dic",DIC_COM_LOAD}); var info = false if info { fprintf(stderr,"--Id-- Conguraturations!! WorldDic is now activated.\r\n") fprintf(stderr,"--Id-- enter \"dic\" command for help.\r\n") } } func readDic()(int){ /* var rk *os.File; var dic = "MyIME-dic.txt"; //rk = fopen("romkana.txt","r"); //rk = fopen("JK-JA-morse-dic.txt","r"); rk = fopen(dic,"r"); if( rk == NULL_FP ){ if( true ){ fprintf(stderr,"--%s-- Could not load %s\n",MyIMEVER,dic); } return -1; } if( true ){ var di int; var line = make(StrBuff,1024); var pat string var out string for di = 0; di < 1024; di++ { if( fgets(line,sizeof(line),rk) == NULLSP ){ break; } fmt.Sscanf(string(line[0:strlen(line)]),"%s %s",&pat,&out); //sscanf(line,"%s %[^\r\n]",&pat,&out); romkana[di].pat = pat; romkana[di].out = out; //fprintf(stderr,"--Dd- %-10s %s\n",pat,out) } dicents += di if( false ){ fprintf(stderr,"--%s-- loaded romkana.txt [%d]\n",MyIMEVER,di); for di = 0; di < dicents; di++ { fprintf(stderr, "%s %s\n",romkana[di].pat,romkana[di].out); } } } fclose(rk); //romkana[dicents].pat = "//ddump" //romkana[dicents].pat = "//ddump" // dump the dic. and clean the command input */ return 0; } func matchlen(stri string, pati string)(int){ if strBegins(stri,pati) { return len(pati) }else{ return 0 } } func convs(src string)(string){ var si int; var sx = len(src); var di int; var mi int; var dstb []byte for si = 0; si < sx; { // search max. match from the position if strBegins(src[si:],"%x/") { // %x/integer/ // s/a/b/ ix := strings.Index(src[si+3:],"/") if 0 < ix { var iv int = 0 //fmt.Sscanf(src[si+3:si+3+ix],"%d",&iv) fmt.Sscanf(src[si+3:si+3+ix],"%v",&iv) sval := fmt.Sprintf("%x",iv) bval := []byte(sval) dstb = append(dstb,bval...) si = si+3+ix+1 continue } } if strBegins(src[si:],"%d/") { // %d/integer/ // s/a/b/ ix := strings.Index(src[si+3:],"/") if 0 < ix { var iv int = 0 fmt.Sscanf(src[si+3:si+3+ix],"%v",&iv) sval := fmt.Sprintf("%d",iv) bval := []byte(sval) dstb = append(dstb,bval...) si = si+3+ix+1 continue } } if strBegins(src[si:],"%t") { now := time.Now() if true { date := now.Format(time.Stamp) dstb = append(dstb,[]byte(date)...) si = si+3 } continue } var maxlen int = 0; var len int; mi = -1; for di = 0; di < dicents; di++ { len = matchlen(src[si:],romkana[di].pat); if( maxlen < len ){ maxlen = len; mi = di; } } if( 0 < maxlen ){ out := romkana[mi].out; dstb = append(dstb,[]byte(out)...); si += maxlen; }else{ dstb = append(dstb,src[si]) si += 1; } } return string(dstb) } func trans(src string)(int){ dst := convs(src); xfputss(dst,stderr); return 0; } //------------------------------------------------------------- LINEEDIT // "?" at the top of the line means searching history const ( GO_UP = 201 GO_DOWN = 202 GO_RIGHT = 203 GO_LEFT = 204 DEL_RIGHT= 205 EV_TIMEOUT = 206 EV_IDLE = 207 ) // should return number of octets ready to be read immediately //fprintf(stderr,"\n--Select(%v %v)\n",err,r.Bits[0]) var EventRecvFd = -1 // file descriptor var EventSendFd = -1 const EventFdOffset = 1000000 const NormalFdOffset = 100 func putEvent(event int, evarg int){ if true { if EventRecvFd < 0 { var pv = []int{-1,-1} syscall.Pipe(pv) EventRecvFd = pv[0] EventSendFd = pv[1] //fmt.Printf("--De-- EventPipe created[%v,%v]\n",EventRecvFd,EventSendFd) } }else{ if EventRecvFd < 0 { // the document differs from this spec // https://golang.org/src/syscall/syscall_unix.go?s=8096:8158#L340 sv,err := syscall.Socketpair(syscall.AF_UNIX,syscall.SOCK_STREAM,0) EventRecvFd = sv[0] EventSendFd = sv[1] if err != nil { fmt.Printf("--De-- EventSock created[%v,%v](%v)\n", EventRecvFd,EventSendFd,err) } } } var buf = []byte{ byte(event)} n,err := syscall.Write(EventSendFd,buf) if err != nil { fmt.Printf("--De-- putEvent[%v](%3v)(%v %v)\n",EventSendFd,event,n,err) } } func ungets(str string){ for _,ch := range str { putEvent(int(ch),0) } } func (gsh*GshContext)xReplay(argv[]string){ hix := 0 if 1 < len(argv) { fmt.Sscanf(argv[1],"%d",&hix) } if hix == 0 || len(argv) <= 1 { hix = len(gsh.CommandHistory)-1 } fmt.Printf("--Ir-- Replay(!%v)\n",hix) //dumpEvents(hix) //gsh.xScanReplay(hix,false) go gsh.xScanReplay(hix,true) } // syscall.Select // 2020-0827 GShell-0.2.3 func FpollIn1(fp *os.File,usec int)(uintptr){ nfd := 1 rdv := syscall.FdSet {} fd1 := fp.Fd() bank1 := fd1/32 mask1 := int32(1 << fd1) rdv.Bits[bank1] = mask1 fd2 := -1 bank2 := -1 var mask2 int32 = 0 if 0 <= EventRecvFd { fd2 = EventRecvFd nfd = fd2 + 1 bank2 = fd2/32 mask2 = int32(1 << fd2) rdv.Bits[bank2] |= mask2 //fmt.Printf("--De-- EventPoll mask added [%d][%v][%v]\n",fd2,bank2,mask2) } tout := syscall.NsecToTimeval(int64(usec*1000)) //n,err := syscall.Select(nfd,&rdv,nil,nil,&tout) // spec. mismatch err := syscall.Select(nfd,&rdv,nil,nil,&tout) if err != nil { //fmt.Printf("--De-- select() err(%v)\n",err) } if err == nil { if 0 <= fd2 && (rdv.Bits[bank2] & mask2) != 0 { if false { fmt.Printf("--De-- got Event\n") } return uintptr(EventFdOffset + fd2) }else if (rdv.Bits[bank1] & mask1) != 0 { return uintptr(NormalFdOffset + fd1) }else{ return 1 } }else{ return 0 } } func fgetcTimeout1(fp *os.File,usec int)(int){ readyFd := FpollIn1(fp,usec) if readyFd < 100 { return EV_TIMEOUT } var buf [1]byte if EventFdOffset <= readyFd { fd := int(readyFd-EventFdOffset) _,err := syscall.Read(fd,buf[0:1]) if( err != nil ){ return EOF; }else{ return int(buf[0]) } } _,err := fp.Read(buf[0:1]) if( err != nil ){ return EOF; }else{ return int(buf[0]) } } func visibleChar(ch int)(string){ switch { case '!' <= ch && ch <= '~': return string(ch) } switch ch { case ' ': return "\\s" case '\n': return "\\n" case '\r': return "\\r" case '\t': return "\\t" } switch ch { case 0x00: return "NUL" case 0x07: return "BEL" case 0x08: return "BS" case 0x0E: return "SO" case 0x0F: return "SI" case 0x1B: return "ESC" case 0x7F: return "DEL" } switch ch { case EV_IDLE: return fmt.Sprintf("IDLE") } return fmt.Sprintf("%X",ch) } func (gsh*GshContext)xScanReplay(hix int,replay bool){ var Start time.Time var events = []Event{} for _,e := range Events { if hix == 0 || e.CmdIndex == hix { events = append(events,e) } } elen := len(events) if 0 < elen { if events[elen-1].event == EV_IDLE { events = events[0:elen-1] } } for i,e := range events { nano := e.when.Nanosecond() micro := nano / 1000 if Start.Second() == 0 { Start = time.Now() } diff := time.Now().Sub(Start) if replay { if e.event != EV_IDLE { putEvent(e.event,0) } }else{ fmt.Printf("%7.3fms #%-3v !%-3v [%v.%06d] %3v %02X %-4v %10.3fms\n", float64(diff)/1000000.0, i, e.CmdIndex, e.when.Format(time.Stamp),micro, e.event,e.event,visibleChar(e.event), float64(e.evarg)/1000000.0) } if e.event == EV_IDLE { nsleep(time.Duration(e.evarg)) } } } func dumpEvents(hix int){ for i,e := range Events { nano := e.when.Nanosecond() micro := nano / 1000 //if e.event != EV_TIMEOUT { if hix == 0 || e.CmdIndex == hix { fmt.Printf("#%-3v !%-3v [%v.%06d] %3v %02X %-4v %10.3fms\n",i, e.CmdIndex, e.when.Format(time.Stamp),micro, e.event,e.event,visibleChar(e.event),float64(e.evarg)/1000000.0) } //} } } func fgetcTimeout(fp *os.File,usec int)(int){ ch := fgetcTimeout1(fp,usec) if ch != EV_TIMEOUT { now := time.Now() if 0 < len(Events) { last := Events[len(Events)-1] dura := int64(now.Sub(last.when)) Events = append(Events,Event{last.when,EV_IDLE,dura,last.CmdIndex}) } Events = append(Events,Event{time.Now(),ch,0,CmdIndex}) } return ch } var TtyMaxCol = 72 var EscTimeout = (100*1000) var ( MODE_ShowMode bool romkanmode bool MODE_CapsLock bool // software CapsLock MODE_LowerLock bool // force lower-case character lock MODE_ViInsert int // visible insert mode, should be like "I" icon in X Window MODE_ViTrace bool // output newline before translation ) type IInput struct { lno int lastlno int pch []int // input queue prompt string line string right string inJmode bool pinJmode bool waitingMeta string // waiting meta character LastCmd string } func (iin*IInput)Getc(timeoutUs int)(int){ ch1 := EOF ch2 := EOF ch3 := EOF if( 0 < len(iin.pch) ){ // deQ ch1 = iin.pch[0] iin.pch = iin.pch[1:] }else{ ch1 = fgetcTimeout(stdin,timeoutUs); } if( ch1 == 033 ){ /// escape sequence ch2 = fgetcTimeout(stdin,EscTimeout); if( ch2 == EV_TIMEOUT ){ }else{ ch3 = fgetcTimeout(stdin,EscTimeout); if( ch3 == EV_TIMEOUT ){ iin.pch = append(iin.pch,ch2) // enQ }else{ switch( ch2 ){ default: iin.pch = append(iin.pch,ch2) // enQ iin.pch = append(iin.pch,ch3) // enQ case '[': switch( ch3 ){ case 'A': ch1 = GO_UP; // ^ case 'B': ch1 = GO_DOWN; // v case 'C': ch1 = GO_RIGHT; // > case 'D': ch1 = GO_LEFT; // < case '3': ch4 := fgetcTimeout(stdin,EscTimeout); if( ch4 == '~' ){ //fprintf(stderr,"x[%02X %02X %02X %02X]\n",ch1,ch2,ch3,ch4); ch1 = DEL_RIGHT } } case '\\': //ch4 := fgetcTimeout(stdin,EscTimeout); //fprintf(stderr,"y[%02X %02X %02X %02X]\n",ch1,ch2,ch3,ch4); switch( ch3 ){ case '~': ch1 = DEL_RIGHT } } } } } return ch1 } func (inn*IInput)clearline(){ var i int fprintf(stderr,"\r"); // should be ANSI ESC sequence for i = 0; i < TtyMaxCol; i++ { // to the max. position in this input action fputc(' ',os.Stderr); } fprintf(stderr,"\r"); } func (iin*IInput)Redraw(){ redraw(iin,iin.lno,iin.line,iin.right) } func redraw(iin *IInput,lno int,line string,right string){ inMeta := false showMode := "" showMeta := "" // visible Meta mode on the cursor position showLino := fmt.Sprintf("!%d! ",lno) InsertMark := "" // in visible insert mode if 0 < len(iin.right) { InsertMark = " " } if( 0 < len(iin.waitingMeta) ){ inMeta = true if iin.waitingMeta[0] != 033 { showMeta = iin.waitingMeta } } if( romkanmode ){ //romkanmark = " *"; }else{ //romkanmark = ""; } if MODE_ShowMode { romkan := "--" inmeta := "-" inveri := "" if MODE_CapsLock { inmeta = "A" } if MODE_LowerLock { inmeta = "a" } if MODE_ViTrace { inveri = "v" } if romkanmode { romkan = "\343\201\202" if MODE_CapsLock { inmeta = "R" }else{ inmeta = "r" } } if inMeta { inmeta = "\\" } showMode = "["+romkan+inmeta+inveri+"]"; } Pre := "\r" + showMode + showLino Output := "" Left := "" Right := "" if romkanmode { Left = convs(line) Right = InsertMark+convs(right) }else{ Left = line Right = InsertMark+right } Output = Pre+Left if MODE_ViTrace { Output += iin.LastCmd } Output += showMeta+Right for len(Output) < TtyMaxCol { // to the max. position that may be dirty Output += " " // should be ANSI ESC sequence // not necessary just after newline } Output += Pre+Left+showMeta // to set the cursor to the current input position fprintf(stderr,"%s",Output) if MODE_ViTrace { if 0 < len(iin.LastCmd) { iin.LastCmd = "" fprintf(stderr,"\r\n") } } } func delHeadChar(str string)(rline string,head string){ _,clen := utf8.DecodeRune([]byte(str)) head = string(str[0:clen]) return str[clen:],head } func delTailChar(str string)(rline string, last string){ var i = 0 var clen = 0 for { _,siz := utf8.DecodeRune([]byte(str)[i:]) if siz <= 0 { break } clen = siz i += siz } last = str[len(str)-clen:] return str[0:len(str)-clen],last } // 3> for output and history // 4> for keylog? // Command Line Editor func xgetline(lno int, prevline string, gsh*GshContext)(string){ var iin IInput iin.lastlno = lno iin.lno = lno CmdIndex = len(gsh.CommandHistory) if( isatty(0) == 0 ){ if( sfgets(&iin.line,LINESIZE,stdin) == NULL ){ iin.line = "exit\n"; }else{ } return iin.line } if( true ){ //var pts string; //pts = ptsname(0); //pts = ttyname(0); //fprintf(stderr,"--pts[0] = %s\n",pts?pts:"?"); } if( false ){ fprintf(stderr,"! "); fflush(stderr); sfgets(&iin.line,LINESIZE,stdin); return iin.line } system("/bin/stty -echo -icanon"); xline := iin.xgetline1(prevline,gsh) system("/bin/stty echo sane"); return xline } func (iin*IInput)Translate(cmdch int){ romkanmode = !romkanmode; if MODE_ViTrace { fprintf(stderr,"%v\r\n",string(cmdch)); }else if( cmdch == 'J' ){ fprintf(stderr,"J\r\n"); iin.inJmode = true } iin.Redraw(); loadDefaultDic(cmdch); iin.Redraw(); } func (iin*IInput)Replace(cmdch int){ iin.LastCmd = fmt.Sprintf("\\%v",string(cmdch)) iin.Redraw(); loadDefaultDic(cmdch); dst := convs(iin.line+iin.right); iin.line = dst iin.right = "" if( cmdch == 'I' ){ fprintf(stderr,"I\r\n"); iin.inJmode = true } iin.Redraw(); } func (iin*IInput)xgetline1(prevline string, gsh*GshContext)(string){ var ch int; iin.Redraw(); for { iin.pinJmode = iin.inJmode iin.inJmode = false ch = iin.Getc(1000*1000) //fprintf(stderr,"A[%02X]\n",ch); if( ch == '\\' || ch == 033 ){ MODE_ShowMode = true metach := ch iin.waitingMeta = string(ch) iin.Redraw(); // set cursor //fprintf(stderr,"???\b\b\b") ch = fgetcTimeout(stdin,2000*1000) // reset cursor iin.waitingMeta = "" cmdch := ch if( ch == EV_TIMEOUT ){ if metach == 033 { continue } ch = metach }else if( ch == 'j' || ch == 'J' ){ iin.Translate(cmdch); continue }else if( ch == 'i' || ch == 'I' ){ iin.Replace(cmdch); continue }else if( ch == 'l' || ch == 'L' ){ MODE_LowerLock = !MODE_LowerLock MODE_CapsLock = false if MODE_ViTrace { fprintf(stderr,"%v\r\n",string(cmdch)); } iin.Redraw(); continue }else if( ch == 'u' || ch == 'U' ){ MODE_CapsLock = !MODE_CapsLock MODE_LowerLock = false if MODE_ViTrace { fprintf(stderr,"%v\r\n",string(cmdch)); } iin.Redraw(); continue }else if( ch == 'v' || ch == 'V' ){ MODE_ViTrace = !MODE_ViTrace if MODE_ViTrace { fprintf(stderr,"%v\r\n",string(cmdch)); } iin.Redraw(); continue }else if( ch == 'c' || ch == 'C' ){ if 0 < len(iin.line) { xline,tail := delTailChar(iin.line) if len([]byte(tail)) == 1 { ch = int(tail[0]) if( 'a' <= ch && ch <= 'z' ){ ch = ch + 'A'-'a' }else if( 'A' <= ch && ch <= 'Z' ){ ch = ch + 'a'-'A' } iin.line = xline + string(ch) } } if MODE_ViTrace { fprintf(stderr,"%v\r\n",string(cmdch)); } iin.Redraw(); continue }else{ iin.pch = append(iin.pch,ch) // push ch = '\\' } } switch( ch ){ case 'P'-0x40: ch = GO_UP case 'N'-0x40: ch = GO_DOWN case 'B'-0x40: ch = GO_LEFT case 'F'-0x40: ch = GO_RIGHT } //fprintf(stderr,"B[%02X]\n",ch); switch( ch ){ case 0: continue; case '\t': iin.Replace('j'); continue case 'X'-0x40: iin.Replace('j'); continue case EV_TIMEOUT: iin.Redraw(); if iin.pinJmode { fprintf(stderr,"\\J\r\n") iin.inJmode = true } continue case GO_UP: if iin.lno == 1 { continue } cmd,ok := gsh.cmdStringInHistory(iin.lno-1) if ok { iin.line = cmd iin.right = "" iin.lno = iin.lno - 1 } iin.Redraw(); continue case GO_DOWN: cmd,ok := gsh.cmdStringInHistory(iin.lno+1) if ok { iin.line = cmd iin.right = "" iin.lno = iin.lno + 1 }else{ iin.line = "" iin.right = "" if iin.lno == iin.lastlno-1 { iin.lno = iin.lno + 1 } } iin.Redraw(); continue case GO_LEFT: if 0 < len(iin.line) { xline,tail := delTailChar(iin.line) iin.line = xline iin.right = tail + iin.right } iin.Redraw(); continue; case GO_RIGHT: if( 0 < len(iin.right) && iin.right[0] != 0 ){ xright,head := delHeadChar(iin.right) iin.right = xright iin.line += head } iin.Redraw(); continue; case EOF: goto EXIT; case 'R'-0x40: // replace dst := convs(iin.line+iin.right); iin.line = dst iin.right = "" iin.Redraw(); continue; case 'T'-0x40: // just show the result readDic(); romkanmode = !romkanmode; iin.Redraw(); continue; case 'L'-0x40: iin.Redraw(); continue case 'K'-0x40: iin.right = "" iin.Redraw(); continue case 'E'-0x40: iin.line += iin.right iin.right = "" iin.Redraw(); continue case 'A'-0x40: iin.right = iin.line + iin.right iin.line = "" iin.Redraw(); continue case 'U'-0x40: iin.line = "" iin.right = "" iin.clearline(); iin.Redraw(); continue; case DEL_RIGHT: if( 0 < len(iin.right) ){ iin.right,_ = delHeadChar(iin.right) iin.Redraw(); } continue; case 0x7F: // BS? not DEL if( 0 < len(iin.line) ){ iin.line,_ = delTailChar(iin.line) iin.Redraw(); } /* else if( 0 < len(iin.right) ){ iin.right,_ = delHeadChar(iin.right) iin.Redraw(); } */ continue; case 'H'-0x40: if( 0 < len(iin.line) ){ iin.line,_ = delTailChar(iin.line) iin.Redraw(); } continue; } if( ch == '\n' || ch == '\r' ){ iin.line += iin.right; iin.right = "" iin.Redraw(); fputc(ch,stderr); break; } if MODE_CapsLock { if 'a' <= ch && ch <= 'z' { ch = ch+'A'-'a' } } if MODE_LowerLock { if 'A' <= ch && ch <= 'Z' { ch = ch+'a'-'A' } } iin.line += string(ch); iin.Redraw(); } EXIT: return iin.line + iin.right; } func getline_main(){ line := xgetline(0,"",nil) fprintf(stderr,"%s\n",line); /* dp = strpbrk(line,"\r\n"); if( dp != NULL ){ *dp = 0; } if( 0 ){ fprintf(stderr,"\n(%d)\n",int(strlen(line))); } if( lseek(3,0,0) == 0 ){ if( romkanmode ){ var buf [8*1024]byte; convs(line,buff); strcpy(line,buff); } write(3,line,strlen(line)); ftruncate(3,lseek(3,0,SEEK_CUR)); //fprintf(stderr,"outsize=%d\n",(int)lseek(3,0,SEEK_END)); lseek(3,0,SEEK_SET); close(3); }else{ fprintf(stderr,"\r\ngotline: "); trans(line); //printf("%s\n",line); printf("\n"); } */ } //== end ========================================================= getline // // $USERHOME/.gsh/ // gsh-rc.txt, or gsh-configure.txt // gsh-history.txt // gsh-aliases.txt // should be conditional? // func (gshCtx *GshContext)gshSetupHomedir()(bool) { homedir,found := userHomeDir() if !found { fmt.Printf("--E-- You have no UserHomeDir\n") return true } gshhome := homedir + "/" + GSH_HOME _, err2 := os.Stat(gshhome) if err2 != nil { err3 := os.Mkdir(gshhome,0700) if err3 != nil { fmt.Printf("--E-- Could not Create %s (%s)\n", gshhome,err3) return true } fmt.Printf("--I-- Created %s\n",gshhome) } gshCtx.GshHomeDir = gshhome return false } func setupGshContext()(GshContext,bool){ gshPA := syscall.ProcAttr { "", // the staring directory os.Environ(), // environ[] []uintptr{os.Stdin.Fd(),os.Stdout.Fd(),os.Stderr.Fd()}, nil, // OS specific } cwd, _ := os.Getwd() gshCtx := GshContext { cwd, // StartDir "", // GetLine []GChdirHistory { {cwd,time.Now(),0} }, // ChdirHistory gshPA, []GCommandHistory{}, //something for invokation? GCommandHistory{}, // CmdCurrent false, []int{}, syscall.Rusage{}, "", // GshHomeDir Ttyid(), false, false, []PluginInfo{}, []string{}, " ", "v", ValueStack{}, GServer{"",""}, // LastServer "", // RSERV cwd, // RWD CheckSum{}, } err := gshCtx.gshSetupHomedir() return gshCtx, err } func (gsh*GshContext)gshelllh(gline string)(bool){ ghist := gsh.CmdCurrent ghist.WorkDir,_ = os.Getwd() ghist.WorkDirX = len(gsh.ChdirHistory)-1 //fmt.Printf("--D--ChdirHistory(@%d)\n",len(gsh.ChdirHistory)) ghist.StartAt = time.Now() rusagev1 := Getrusagev() gsh.CmdCurrent.FoundFile = []string{} fin := gsh.tgshelll(gline) rusagev2 := Getrusagev() ghist.Rusagev = RusageSubv(rusagev2,rusagev1) ghist.EndAt = time.Now() ghist.CmdLine = gline ghist.FoundFile = gsh.CmdCurrent.FoundFile /* record it but not show in list by default if len(gline) == 0 { continue } if gline == "hi" || gline == "history" { // don't record it continue } */ gsh.CommandHistory = append(gsh.CommandHistory, ghist) return fin } // Main loop func script(gshCtxGiven *GshContext) (_ GshContext) { gshCtxBuf,err0 := setupGshContext() if err0 { return gshCtxBuf; } gshCtx := &gshCtxBuf //fmt.Printf("--I-- GSH_HOME=%s\n",gshCtx.GshHomeDir) //resmap() /* if false { gsh_getlinev, with_exgetline := which("PATH",[]string{"which","gsh-getline","-s"}) if with_exgetline { gsh_getlinev[0] = toFullpath(gsh_getlinev[0]) gshCtx.GetLine = toFullpath(gsh_getlinev[0]) }else{ fmt.Printf("--W-- No gsh-getline found. Using internal getline.\n"); } } */ ghist0 := gshCtx.CmdCurrent // something special, or gshrc script, or permanent history gshCtx.CommandHistory = append(gshCtx.CommandHistory,ghist0) prevline := "" skipping := false for hix := len(gshCtx.CommandHistory); ; { gline := gshCtx.getline(hix,skipping,prevline) if skipping { if strings.Index(gline,"fi") == 0 { fmt.Printf("fi\n"); skipping = false; }else{ //fmt.Printf("%s\n",gline); } continue } if strings.Index(gline,"if") == 0 { //fmt.Printf("--D-- if start: %s\n",gline); skipping = true; continue } if false { os.Stdout.Write([]byte("gotline:")) os.Stdout.Write([]byte(gline)) os.Stdout.Write([]byte("\n")) } gline = strsubst(gshCtx,gline,true) if false { fmt.Printf("fmt.Printf %%v - %v\n",gline) fmt.Printf("fmt.Printf %%s - %s\n",gline) fmt.Printf("fmt.Printf %%x - %s\n",gline) fmt.Printf("fmt.Printf %%U - %s\n",gline) fmt.Printf("Stouut.Write -") os.Stdout.Write([]byte(gline)) fmt.Printf("\n") } /* // should be cared in substitution ? if 0 < len(gline) && gline[0] == '!' { xgline, set, err := searchHistory(gshCtx,gline) if err { continue } if set { // set the line in command line editor } gline = xgline } */ fin := gshCtx.gshelllh(gline) if fin { break; } prevline = gline; hix++; } return *gshCtx } func main() { gshCtxBuf := GshContext{} gsh := &gshCtxBuf argv := os.Args if 1 < len(argv) { if isin("version",argv){ gsh.showVersion(argv) return } comx := isinX("-c",argv) if 0 < comx { gshCtxBuf,err := setupGshContext() gsh := &gshCtxBuf if !err { gsh.gshellv(argv[comx+1:]) } return } } if 1 < len(argv) && isin("-s",argv) { }else{ gsh.showVersion(append(argv,[]string{"-l","-a"}...)) } script(nil) //gshCtx := script(nil) //gshelll(gshCtx,"time") } //
//
Considerations
// - inter gsh communication, possibly running in remote hosts -- to be remote shell // - merged histories of multiple parallel gsh sessions // - alias as a function or macro // - instant alias end environ export to the permanent > ~/.gsh/gsh-alias and gsh-environ // - retrieval PATH of files by its type // - gsh as an IME with completion using history and file names as dictionaies // - gsh a scheduler in precise time of within a millisecond // - all commands have its subucomand after "---" symbol // - filename expansion by "-find" command // - history of ext code and output of each commoand // - "script" output for each command by pty-tee or telnet-tee // - $BUILTIN command in PATH to show the priority // - "?" symbol in the command (not as in arguments) shows help request // - searching command with wild card like: which ssh-* // - longformat prompt after long idle time (should dismiss by BS) // - customizing by building plugin and dynamically linking it // - generating syntactic element like "if" by macro expansion (like CPP) >> alias // - "!" symbol should be used for negation, don't wast it just for job control // - don't put too long output to tty, record it into GSH_HOME/session-id/comand-id.log // - making canonical form of command at the start adding quatation or white spaces // - name(a,b,c) ... use "(" and ")" to show both delimiter and realm // - name? or name! might be useful // - htar format - packing directory contents into a single html file using data scheme // - filepath substitution shold be done by each command, expecially in case of builtins // - @N substition for the history of working directory, and @spec for more generic ones // - @dir prefix to do the command at there, that means like (chdir @dir; command) // - GSH_PATH for plugins // - standard command output: list of data with name, size, resouce usage, modified time // - generic sort key option -nm name, -sz size, -ru rusage, -ts start-time, -tm mod-time // -wc word-count, grep match line count, ... // - standard command execution result: a list of string, -tm, -ts, -ru, -sz, ... // - -tailf-filename like tail -f filename, repeat close and open before read // - max. size and max. duration and timeout of (generated) data transfer // - auto. numbering, aliasing, IME completion of file name (especially rm of quieer name) // - IME "?" at the top of the command line means searching history // - IME %d/0x10000/ %x/ffff/ // - IME ESC to go the edit mode like in vi, and use :command as :s/x/y/g to edit history // - gsh in WebAssembly // - gsh as a HTTP server of online-manual //---END--- (^-^)/ITS more
// var WorldDic = // "data:text/dic;base64,"+ "Ly8gTXlJTUUvMC4wLjEg6L6e5pu4ICgyMDIwLTA4MTlhKQpzZWthaSDkuJbnlYwKa28g44GT"+ "Cm5uIOOCkwpuaSDjgasKY2hpIOOBoQp0aSDjgaEKaGEg44GvCnNlIOOBmwprYSDjgYsKaSDj"+ "gYQK"; // var JA_JKLDic = // "data:text/dic;base64,"+ "Ly92ZXJsCU15SU1FamRpY2ptb3JzZWpKQWpKS0woMjAyMGowODE5KSheLV4pL1NhdG94SVRT"+ "CmtqamprbGtqa2tsa2psIOS4lueVjApqamtqamwJ44GCCmtqbAnjgYQKa2tqbAnjgYYKamtq"+ "amwJ44GICmtqa2trbAnjgYoKa2pra2wJ44GLCmpramtrbAnjgY0Ka2tramwJ44GPCmpramps"+ "CeOBkQpqampqbAnjgZMKamtqa2psCeOBlQpqamtqa2wJ44GXCmpqamtqbAnjgZkKa2pqamts"+ "CeOBmwpqamprbAnjgZ0KamtsCeOBnwpra2prbAnjgaEKa2pqa2wJ44GkCmtqa2pqbAnjgaYK"+ "a2tqa2tsCeOBqApramtsCeOBqgpqa2prbAnjgasKa2tra2wJ44GsCmpqa2psCeOBrQpra2pq"+ "bAnjga4Kamtra2wJ44GvCmpqa2tqbAnjgbIKampra2wJ44G1CmtsCeOBuApqa2tsCeOBuwpq"+ "a2tqbAnjgb4Ka2tqa2psCeOBvwpqbAnjgoAKamtra2psCeOCgQpqa2tqa2wJ44KCCmtqamwJ"+ "44KECmpra2pqbAnjgoYKampsCeOCiApra2tsCeOCiQpqamtsCeOCigpqa2pqa2wJ44KLCmpq"+ "amwJ44KMCmtqa2psCeOCjQpqa2psCeOCjwpramtramwJ44KQCmtqamtrbAnjgpEKa2pqamwJ"+ "44KSCmtqa2prbAnjgpMKa2pqa2psCeODvApra2wJ44KbCmtramprbAnjgpwKa2pramtqbAnj"+ "gIEK"; // // /*
References
*/ /*
Raw Source
Whole file
CSS part
JavaScript part
Builtin data part
*/ /* --> *///